Check out what I'm putting together for my bro!

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
User avatar
ShockTherapy
Posts: 693
Joined: Fri Dec 04, 2009 7:06 am
Location: University Place

Check out what I'm putting together for my bro!

Post by ShockTherapy »

I had these nice amps in my closet collecting dust so I sold them to my bro. As you can see in the pic I'm in the middle of wiring things up on the amp rack. I would have used these myself but I need more power to my components. Man... The original Nelson Pass D200 has a sweet sound! He'll be using the D200 for the Rainbow components and the smaller D60 for his rear fill. I hated getting rid of these gems but times are tough.

What do you guys think of the old D-series soundstreams? I just love em.
Attachments
D200 and D60 2.jpg
D200 and D60 2.jpg (33.87 KiB) Viewed 6351 times
Clarion DRZ-9255
JL HD 900/5
Zapco Z300
JBL MS-8
Dynaudio MW160 (midbass)
Audible Physics XR3m (mid)
Morel MT23 (high)
Morel 5c (Rearfill)
Morel Ultimo SC12
User avatar
kg1961
Got wood?
Posts: 9051
Joined: Sun Apr 06, 2008 10:31 pm
Location: Calgary

Post by kg1961 »

very nice just make sure the caps have been changed they are getting old. very nice condition also
most of my gear is gone :liar:
2020 honda accord sport
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

love em, had a couple and up to now the D100 mk1 was the sweetest, i have an MC300 at the moment i'm waiting on a diode to arrive from jandelectronics then that'll get a good audition and see if they're as good s the hype says :lol:
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:

Post by stipud »

Cool looking gear and very nice wire routing!
User avatar
ShockTherapy
Posts: 693
Joined: Fri Dec 04, 2009 7:06 am
Location: University Place

Post by ShockTherapy »

stipud wrote:Cool looking gear and very nice wire routing!
Thanks! I know it's going to be behind the beauty panel and it won't be seen... but it's important to me! :lol: I'll be running Zero Guage Stinger wire to the distros on the right. should look real nice when i'm done! it's a shame the wiring wont be seen.
Clarion DRZ-9255
JL HD 900/5
Zapco Z300
JBL MS-8
Dynaudio MW160 (midbass)
Audible Physics XR3m (mid)
Morel MT23 (high)
Morel 5c (Rearfill)
Morel Ultimo SC12
User avatar
Pillow
Posts: 736
Joined: Sat Nov 07, 2009 11:04 am
Location: Warrenton VA

Post by Pillow »

Very nice.

More pics are mandatory :)
2003 Saab 9-3 Vector: Faital, Dayton, JBL,+ DIY mixed up mess
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
User avatar
smgreen20
Posts: 2873
Joined: Wed Dec 20, 2006 11:23 am
Location: Somewhere in Between

Post by smgreen20 »

3+, 3-, but only 2 amps pictured, what's the 3rd amp?

I didn't get into SS until the following models, the ones that look the same, but not as tall and the terminals are in the casing.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."

Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
User avatar
ShockTherapy
Posts: 693
Joined: Fri Dec 04, 2009 7:06 am
Location: University Place

Post by ShockTherapy »

smgreen20 wrote:3+, 3-, but only 2 amps pictured, what's the 3rd amp?

I didn't get into SS until the following models, the ones that look the same, but not as tall and the terminals are in the casing.
We are in the process of aquiring a second D200 to mono on a single IDQv2. We will have it within a few weeks :( ... hate waiting! It's gonne look nice with them all lined up. Should sound friggin killer. A guy on fleebay has one but the one I'm sourcing for him is near mint. :clap:
I donated an Audiocontrol 4xs to the cause to filter these since they have no onboard processing.
Clarion DRZ-9255
JL HD 900/5
Zapco Z300
JBL MS-8
Dynaudio MW160 (midbass)
Audible Physics XR3m (mid)
Morel MT23 (high)
Morel 5c (Rearfill)
Morel Ultimo SC12
wheelieking71
Posts: 199
Joined: Wed Apr 29, 2009 6:42 pm

Post by wheelieking71 »

very awsome amps! D200 is my all-time second favorite. they sound fantastic.
User avatar
ShockTherapy
Posts: 693
Joined: Fri Dec 04, 2009 7:06 am
Location: University Place

Post by ShockTherapy »

Ended up picking up an original Soundstream Reference 300 as a sub amp on this setup. It should power the single IDQ10v2 nicely at 4ohm mono (300w). I'll clean and touch it up a little to make it look nicer. I've always loved this series of Soundstream... sweet sound.
Attachments
3n13md3o15O65U45S4aahfa9fd75d0e001e1d[1].jpg
3n13md3o15O65U45S4aahfa9fd75d0e001e1d[1].jpg (6.75 KiB) Viewed 6219 times
Last edited by ShockTherapy on Tue Oct 19, 2010 8:56 pm, edited 1 time in total.
Clarion DRZ-9255
JL HD 900/5
Zapco Z300
JBL MS-8
Dynaudio MW160 (midbass)
Audible Physics XR3m (mid)
Morel MT23 (high)
Morel 5c (Rearfill)
Morel Ultimo SC12
lopezi
Posts: 51
Joined: Sat Feb 10, 2007 9:16 am

Re: Check out what I'm putting together for my bro!

Post by lopezi »

ShockTherapy wrote:I had these nice amps in my closet collecting dust so I sold them to my bro. As you can see in the pic I'm in the middle of wiring things up on the amp rack. I would have used these myself but I need more power to my components. Man... The original Nelson Pass D200 has a sweet sound! He'll be using the D200 for the Rainbow components and the smaller D60 for his rear fill. I hated getting rid of these gems but times are tough.

What do you guys think of the old D-series soundstreams? I just love em.
I used to have a D200II, it was a pretty solid amp. I used it in different setups, carried it forward into each vehicle. I offloaded it a few years back...

Image
User avatar
ShockTherapy
Posts: 693
Joined: Fri Dec 04, 2009 7:06 am
Location: University Place

Post by ShockTherapy »

Looks like I'm going to use the Reference 300 along with two others to run my fully active frontstage! woohoo! I was able to find my bro a nice Reference 500 for his low end... I know! Iwanted that one but it wouldnt fit my application. He's going to be running it to a single sealed IDQ10v2. damn! thats gonne sound great! anyhow, can't wait to get everything installed so i can finally go active with my 3-ways.
Clarion DRZ-9255
JL HD 900/5
Zapco Z300
JBL MS-8
Dynaudio MW160 (midbass)
Audible Physics XR3m (mid)
Morel MT23 (high)
Morel 5c (Rearfill)
Morel Ultimo SC12
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14797
Joined: Fri Dec 19, 2008 9:53 pm

Post by ttocs »

man its funny that if they went with a retro finn'd amp like those or the ms, they would be one of the few making them. I like the new style of black box amps that everyone is making but I think the way the form followed the function is cool and I kinda miss it. Love that blue color too........
what else can I say I am a grumpy asshole most of the time.
User avatar
ShockTherapy
Posts: 693
Joined: Fri Dec 04, 2009 7:06 am
Location: University Place

Post by ShockTherapy »

I ended up using the 300 that I was going to use for my bro's sub amp to add to my other 2 300 refs for my frontstage. Ended up finding him a nice Ref500 to run the single IDQ. Here are some pics. sorry ablout the lame camera phone pics.
Attachments
IMG00060-20101031-2123.jpg
IMG00060-20101031-2123.jpg (78.99 KiB) Viewed 6113 times
IMG00058-20101031-2123.jpg
IMG00058-20101031-2123.jpg (523.15 KiB) Viewed 6113 times
Clarion DRZ-9255
JL HD 900/5
Zapco Z300
JBL MS-8
Dynaudio MW160 (midbass)
Audible Physics XR3m (mid)
Morel MT23 (high)
Morel 5c (Rearfill)
Morel Ultimo SC12
Post Reply