Phoenix Gold Phorum

So I bought a couple of ZX450's and a black ZX350.

For the 450's I need the a speaker terminal block in mint or new condition for one amp and I need a battery input in avg condition for the other one.

Also it looks like one of these took a whack in shipping. When I replace the caps I am going to examine all the solder joints of the larger parts in the amp to make sure they are not cracked due to the force of impact. Might reheat them anyways in case there is a crack that I don't see. Anything else I should look at?

Finally, what resistors, pots, or anything else should I inspect or replace in order to make sure all of these amps are good before I put them in my car?

Thanks in advance

Anyone? Anyone? Bueller?

I MAY be able to assist with the terminals
are they fully housed or the ones like in ZPA that have no housing in/on the back side?
(referring to power terminal)
IIRC the connectors are just like the MS, perhaps w/ a lil variance?
m

Cool. Here are some pics:

think the power is good to go- will confirm when back to shop
not thinking to poromising about the spkr one though... but maybe.

white in color or black?

if you get stuck for a speaker terminal i may have one here but dont know its condition

White for both. I thought PG would have some hanging around but no dice. Thanks

I have a black speaker terminal brand new? you could always dye the white power terminal black to match it with RIT dye

Really? Never tried that before. I assume it won't affect the gold. How much do you want for it? Will the white match perfectly?

you remove the gold - well at least of what gold you can remove... and then clean up the gold when finished with a q-tip

forgot to check stash at shop I'll be sure to look today

Cool thanks. I appreciate it.

okay so looks as though I have NIB OEM power and spkr in white

in the black I only have the power term
but you could get white and make black


NIB-OEM power & spkr in white
50 for set shipped lower 48

m

wait- just found an OEM spkr in black!
missing the screws- but I could put new screws in from the white one- whichever way u wanna go
UTY

m

Hey I will take the NIB white power and speaker blocks for 50 shipped. I don't need the black ones so keep them for someone else. You have any of the clear windows for a ZX350? I need two of those as well. Please PM me your paypal info. Thanks

csperl1 wrote:Hey I will take the NIB white power and speaker blocks for 50 shipped. I don't need the black ones so keep them for someone else. You have any of the clear windows for a ZX350? I need two of those as well. Please PM me your paypal info. Thanks

i do have a couple clear windows...but they are kinda torn up...

I do have two NIB smokey ones with holes for screws versus glue attachment.

Want the smoked ones? could do set for 30 (they are NIB OEM)

Otherwise 10 for the clear ones as they are kinda beat up and all- but would still work

m

Ill take the reg clear ones. These are going in a 6/10 black zx350v1 so no need to have them all fancy schmancy...

csperl1 wrote:Ill take the reg clear ones. These are going in a 6/10 black zx350v1 so no need to have them all fancy schmancy...

okay cool got it.

so 60 total... ? it sounds...?
and i will send you pm with my email and might even be able to get them out today - but if not monday for sure.

Matt

Nope that's it.