how are you guys running your RSDc subs??

gentlejax2 · Post by **gentlejax2** » Fri Oct 29, 2010 4:25 am

still trying to get the right results from the rsdc ...its part a problem of my box and my sub amp. its running off my ref 300 right now but thats temporary till i get more power on it.

box is temp too till I have time to myself to built correct size...

in the meantime I want to know what and how your using your RSDc.

I havnt given up yet

Post by **kg1961** » Fri Oct 29, 2010 5:48 am

no matter what power you give the sub the box is 80-90% of the problem
you need a good strong right sized box or you will never be able to tell.
power 300watt rms will make it sound good not be super loud but it all music taste ect.
Stipud uses his with only 250 i have heard it very clean and does what it need to do in his car set up

Post by **stipud** » Fri Oct 29, 2010 7:05 am

What specifically are you looking for? More output?

For a 10, .5-.6cuft is all it needs. For a 12, 1-1.2cuft. If your box is too big you can easily take up space with chunks of 2x4, blocks of styrofoam, etc. In any larger boxes the sub tends to sound boomy, and loses some of its uber-blending smoothness.

For me one 12 on 250w is more than enough to keep up with my front stage of 75x2. But my tastes differ from most people... I only like an extra 3-6dB in my bassline, at most, while I have found the majority of car audio listeners really prefer an outrageous 10-20dB range.

Pillow · Post by **Pillow** » Fri Oct 29, 2010 8:33 am

I have found the majority of car audio listeners really prefer an outrageous 10-20dB range.

I resemble those remarks! LOL

Jax, try the TIs

gentlejax2 · Post by **gentlejax2** » Fri Oct 29, 2010 9:48 am

my box was bought before I got the sub...like days before I found one for sale ...thanks to bfowler....

anyhow..the box is like .80 or less...and I want to get it into a 1 cubic foot box really. I dont want to use more space than that.

I tried it with my ported box that is around 1.25 and it was louder but not as clean as with the sealed .

so I really need to get the box down right and go from there. I at one time had about 500 rms on it and another with 700 and it was about right in the small box.

but the box is my #1 issue right now. the ref300 is actually not too bad on it. I am sure if the box were right then it would be even better.

just trying to decide if I want to build one or buy one. I dont seem to have any free time anymore...

tried to take some vacation this coming week and somehow someone else has jacked that up

Post by **stipud** » Fri Oct 29, 2010 10:38 am

Do you have a 10 or 12?

gentlejax2 · Post by **gentlejax2** » Fri Oct 29, 2010 6:11 pm

Post by **stipud** » Fri Oct 29, 2010 10:21 pm

.8 is pretty small. You should just plug your ported box!

gentlejax2 · Post by **gentlejax2** » Sat Oct 30, 2010 4:01 am

stipud wrote:.8 is pretty small. You should just plug your ported box!

ha ha ...I am actually thinking about taking my ported box down to buddies and putting it on his table saw and slicing a few inches off it and putting a new back on it. length is pretty close to perfect just a little deeper than I need.....

but that might turn out too getto...

plus I want to build a new box to fit in a specific space in the trunk.