Phoenix Gold Phorum

I've been looking into the KnuKonceptz Krystal Cables:

http://www.knukonceptz.com/productDetai ... ID=KRY2.2M

Unfortunately I can't tell from the pics on their site if the RCA pants will allow the cables to reach from one RCA terminal end of an MS2125 to the other as they are far apart.

Can anyone confirm?

What other budget audiophile grade RCA cable options do I have for fitment of these MS amps to provide me a sleek look and secure connection to go along with the rest of my Knu cabling?

i can measure the distance for you of the knu cables.

also, maybe you could try 90degree adapters and turn them bot inward?

Bfowler wrote:i can measure the distance for you of the knu cables.

also, maybe you could try 90degree adapters and turn them bot inward?

I do have some OS PG 90 degree connects

A measurement from the V of the pants out to the RCA end would be great!

the lenght is shorter then i remembered. 3 inches exactly to the point within the barrel where it would connect when you pressed it on (so a little more then 3.5 to the very tip of the gold + connection)

Bfowler wrote:the lenght is shorter then i remembered. 3 inches exactly to the point within the barrel where it would connect when you pressed it on (so a little more then 3.5 to the very tip of the gold + connection)

I think that'll work (given they get them back in stock) since the distance from MS RCA center to center measures 5.0". The 90 degree ends I have add 0.5" each to give me approx 7.0" total or 3.5" per side from the V cable pants out.

How is the flexibility of the Krystal Cables overall and from the RCA connector end (do they flex easily 45 degrees or 90 degrees)?

AAMP sells discounted Stinger rca cables on ebay under the seller name accessoriesoutlet09. The hpm3 cables are super!

linked for ya^

http://cgi.ebay.com/STINGER-6-FT-2-CHAN ... 3caa475092

Eh...pretty sure that's not AAMP selling it.....why would they be selling streetwires accessories?


But yea, good deals nonetheless.

I've never seen these used before, pretty slick looking:

http://www.hifisoundconnection.com/Shop ... /SFV/30046

KnuKoncepts are out of the Krystal Cable RCAs for another 4-6 weeks

So I received a 2M KnuKoncept Krystal Cable RCA from PP member rscecil007 today in the mail from his sale thread, slightly used. First impression I noticed a nice built thick jacketed RCA with nice grippy aluminum ends and gold connectors. Upon further investigation I noticed all but one of the four heat shrink around the wire solder joints were tight. Looks like someone forgot to finish manufacturing the cable ends, not a big deal.

A bigger deal is fitment, they fail to reach on an MS amp with the pants:



Solution:



My old school Stinger Dream Series, same issue:



Phoenix Gold Csi Compact Super Triple Shield Series....Ahhhhh good ol' PG:

great pics!

they say nothing but photobucket to me.

that is the funniest thing I have seen in a while!

ttocs wrote:that is the funniest thing I have seen in a while!

That's the look I was going for

Sizing issue w/PP and photobucket...fixing now.

I meant his fail sign, I fuck up like that all time

those pg cables are hard to come by, I have been collecting them all year for the pggt. I hope I have enough and some extra by now as I have a pretty good pile. Once I am done what ever extra I have will be posted here if anyone else is looking for some.

ttocs wrote:those pg cables are hard to come by, I have been collecting them all year for the pggt. I hope I have enough and some extra by now as I have a pretty good pile. Once I am done what ever extra I have will be posted here if anyone else is looking for some.

Hit me up first if you have some to unload as I may be interested

KnuKoncepts are out of the Krystal Cable RCAs for another 4-6 weeks

So I received a 2M KnuKoncept Krystal Cable RCA from PP member rscecil007 today in the mail from his sale thread, slightly used. First impression I noticed a nice built thick jacketed RCA with nice grippy aluminum ends and gold connectors. Upon further investigation I noticed all but one of the four heat shrink around the wire solder joints were tight. Looks like someone forgot to finish manufacturing the cable ends, not a big deal.

Seems like they are constantly out of stock. The quality of the cables are top notch, but the aluminum connectors have a tendancy to strip out where they attach to the gold plated portion. Kind of a PITA when you go to unplug them.

Thumper88 wrote:Eh...pretty sure that's not AAMP selling it.....why would they be selling streetwires accessories?


But yea, good deals nonetheless.

i have ordered from them several times for about a dozen stinger rca cables and the shipping label came from an AAMP warehouse at a remote location. I can not say as to why they sell streetwires. The confirmation email was from an AAMP email address as well.

Streetwires is Mitek
Stinger is, of course, AAMP