MS2250 fan control with stinger fans?

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

MS2250 fan control with stinger fans?

Post by marko »

bit late but can anyone see any issues i'm gonna have with running stinger 8" squirel fans off MS2250 fan boards? one per fan board..

Mark.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
Eric D
Short Bus Driver
Posts: 4259
Joined: Sat Dec 30, 2006 8:50 am

Re: MS2250 fan control with stinger fans?

Post by Eric D »

You will most likely fry the fan control circuit.

Make sure the combined current draw of the new fans is the same OR LESS than the draw of the original triple fan unit. I fried a ZX fan control with a fan rated for only slightly more current than stock. I am guessing all the PG fan control circuits are built to the minimums.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Re: MS2250 fan control with stinger fans?

Post by marko »

they draw .19A so i figured they would be fine? i do have a spare fan board i can play with :?:
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Re: MS2250 fan control with stinger fans?

Post by mhyde71 »

i have my stinger squirrel fan hooked direct with my 2250 fan board w/o any trble for last 18 months...
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Re: MS2250 fan control with stinger fans?

Post by marko »

mhyde71 wrote:i have my stinger squirrel fan hooked direct with my 2250 fan board w/o any trble for last 18 months...
nice one 8) i have 3 ms2250's and 2 fans so only 2 amps will control them, one will be hooked up to the amp powering sub so this one should kick in before the one not controlling a fan gets anywhere near hot (if that makes sense :D ).

the fan boards have variable output if i'm not mistaken?
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Top
Post Reply

Return to “Car Audio”