Phoenix Gold Phorum

hi all i found an alpine bass controller and i was just woundering if i modded it if it would work on my pg stuff. is it as simple as changing the order of the wires on the end that goes into the amp?
thanks

are you wanting to change the level or adj bass boost?

adjust the amount of bass

the remote on the pg amps controls the level not the bass boost.

sorry my bad the lpl controller is pritty much what im trying do with this i no people have made them with rockford dials and stuff so i thought if i could use this one i found then it would save me from ordering one

we would need to know a little more then what you have told us so far. A complete list of what you have, and what you are wanting...

iv got a sofas with the cross over with a set of eqts and tbas but i didnt get the lpl44 with it so i want to see if i can just make the alpine controller work the same way as the lpl44. the controller is a remote bass level control -12db of linear adjustment range thats pritty much all it says on the package besides the cable included and stuff like that. the only reason i want it is for when people get in my car that dont like alot of bass and stuff like my dad lol i can just use the controller to turn the bass down without messing with the settings on the head unit and stuff. hope that will help you help me lol thanks

bowes wrote:hi all i found an alpine bass controller and i was just woundering if i modded it if it would work on my pg stuff. is it as simple as changing the order of the wires on the end that goes into the amp?
thanks

http://cgi.ebay.com/PHOENIX-GOLD-BASS-B ... Amplifiers

pretty sure the lpl will not work for him. I am not familiar with the alpine piece, what is the model number? If it is made just to attenuate, or turn down the bass in the signal it may work but not for sure.

Just tell yer folks to keep their paws off yer stereo(please?)!

Perfect solution for you... I've used HUNDREDS of these & they are perfect.

When the knob is all the way down...you have ZERO bass/sound!
It will not interfere with any of the sound, just a standard potentiometer ran inline with your RCA's.
We usually take it apart & mount it where you only see the knob..



http://www.pac-audio.com/productDetails ... egoryID=28

thats perfect thanks man

If you have a PG amp an LPL is all you need. You can easily make one yourself.

http://download.phoenixphorum.com/TechS ... L_Info.pdf

yes thats what im looking do. is all i have to do is just change the order the wires run just on the one end or both? on the cord i have the color code left to right is yellow,green,red,black. thanks guys

changing the order is only if you want to reverse the volume. This is only needed depending on how you mount it and normally the way it is listed is fine. Your pg amp does have an input for this right?

ya the amps i have have the lpl plug on them and the cross over has it too. the only wires i wasnt sure of was the red and the green. they are reversed from what the pgs are.