Page 1 of 2

Our new 10" Xcon

Posted: Thu Sep 15, 2011 5:30 am
by denim
As always, I preface saying if anyone is not cool with outside brands I am not trying to take advantage of the PG board, Brian please boot this topic if you feel so. Just trying to share my excitement with my PG friends, hence no links etc. I occasionally post these up here as we have a few fans over here and I get pm's from people who are interested in our drivers. So with that said, we are finally adding a 10" version to our Xcon line up.

Image

Re: 3.7
Fs: 33.2 HZ
Qms: 4.87
Qes: .37
Qts: .35
Mms: 202.5 g
Vas: 15.27 l
Sd: 310 cm^2
Bl: 20.65
Spl: 83.7 1W/1m
Xmax: 29mm
Wattage: 1750wRMS
Displacement: 0.15 cuft


10" Enclosure Recommendations
Sealed: .75-1.00ft^3
Sealed Optimal: 1.0-1.25ft^3
Ported: 1.25-1.50ft^3 @ 27-34hz
Ported Optimal: 1.5-1.75ft^3 @ 27-34hz
Outside Diameter: 11.000"
Inside Diameter: 9.250"
Mounting Depth: 6.000"

Image

Image

Image

Image


Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 6:28 am
by shawn k
Makes me want to buy one just because of what it says on the decal!!!

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 7:06 am
by kg1961
OMG that looks crazy

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 8:05 am
by Bfowler
lol, looks like it might not fit in a box becasue the magnet is as big as the mounting diameter!

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 8:07 am
by pimpinest123
How much do those subs run each

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 9:30 am
by denim
Bfowler wrote:lol, looks like it might not fit in a box becasue the magnet is as big as the mounting diameter!
That last picture shows it will just barely, and I mean just barely squeak in. :)

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 9:32 am
by denim
pimpinest123 wrote:How much do those subs run each
$369, we should be charging much more to come close to getting a sniff of the margins the big boys are getting.

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 11:19 am
by dvnt88
That's 1 sexxy sub and the price is waaaaaay lower than I expected :shock: . Is the sub purely for SPL or is it a mix of SPL and SQ? Might have to pick 1 up as I'm lookin' for a new 10" to replace my TIElite12D. :mrgreen:

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 12:23 pm
by Lux
That decal deffinatly make it a desireable sub. Does it come in other sizes? :thumbs:

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 3:47 pm
by denim
dvnt88 wrote:That's 1 sexxy sub and the price is waaaaaay lower than I expected :shock: . Is the sub purely for SPL or is it a mix of SPL and SQ? Might have to pick 1 up as I'm lookin' for a new 10" to replace my TIElite12D. :mrgreen:
This model line is not an SPL model, the Xcon's are SQ biased subs with good power handling. People have put up good numbers with them, but that was not the intention, that is what our Zcon is for. The Xcon is in that super sub class if you will, as in not peaky, LOVES the low low stuff, does not need bonkers power (I ran the original 12 for months will a mere 240 watts and people did not believe me), so essentially a great all around driver that has a mix of abilities but does not really sacrifice its original goal to please everyone. A good number of people are running them sealed.

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 3:48 pm
by denim
Lux wrote:That decal deffinatly make it a desireable sub. Does it come in other sizes? :thumbs:
Yes, the 12/15/18 has been out for a little while. This is just the release of the 10" version. :)

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 5:31 pm
by dvnt88
denim wrote:
dvnt88 wrote:That's 1 sexxy sub and the price is waaaaaay lower than I expected :shock: . Is the sub purely for SPL or is it a mix of SPL and SQ? Might have to pick 1 up as I'm lookin' for a new 10" to replace my TIElite12D. :mrgreen:
This model line is not an SPL model, the Xcon's are SQ biased subs with good power handling. People have put up good numbers with them, but that was not the intention, that is what our Zcon is for. The Xcon is in that super sub class if you will, as in not peaky, LOVES the low low stuff, does not need bonkers power (I ran the original 12 for months will a mere 240 watts and people did not believe me), so essentially a great all around driver that has a mix of abilities but does not really sacrifice its original goal to please everyone. A good number of people are running them sealed.
Are they available now :hmm: and if so :whistle: ...where can I get my hands on 1? :mrgreen:

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 6:24 pm
by shawn k
http://www.soundsolutionsaudio.com/ "store" at the top of the page!

cool site!

Re: Our new 10" Xcon

Posted: Thu Sep 15, 2011 11:48 pm
by Francious70
Is this in the same family as the 12" version we reviewed for you a few years back and I still own?

Re: Our new 10" Xcon

Posted: Fri Sep 16, 2011 7:58 am
by Bfowler
no, that was the dcon, their low end line (for lack of a better term, it was still a pretty awesome sub.)

Re: Our new 10" Xcon

Posted: Fri Sep 16, 2011 10:13 am
by denim
Yes, Dcon and Xcon very different in build.

Re: Our new 10" Xcon

Posted: Sat Sep 17, 2011 7:27 pm
by smgreen20
That's a beefy motor and high RMS w/a sub that size. Saying that, that's a hell of a shallow mount depth considering.

Re: Our new 10" Xcon

Posted: Sun Sep 18, 2011 10:54 pm
by nutxo
it figures. I've kinda been talked into running something BIGGER than 10s next year.

Re: Our new 10" Xcon

Posted: Thu Sep 22, 2011 10:31 am
by dvnt88
denim wrote:
dvnt88 wrote:That's 1 sexxy sub and the price is waaaaaay lower than I expected :shock: . Is the sub purely for SPL or is it a mix of SPL and SQ? Might have to pick 1 up as I'm lookin' for a new 10" to replace my TIElite12D. :mrgreen:
This model line is not an SPL model, the Xcon's are SQ biased subs with good power handling. People have put up good numbers with them, but that was not the intention, that is what our Zcon is for. The Xcon is in that super sub class if you will, as in not peaky, LOVES the low low stuff, does not need bonkers power (I ran the original 12 for months will a mere 240 watts and people did not believe me), so essentially a great all around driver that has a mix of abilities but does not really sacrifice its original goal to please everyone. A good number of people are running them sealed.
Hey Bro - Just placed my order for this bad boy (10" 2 ohm DVC) to replace my TIElite 12D :shock: and was between the Xcon and a 10w7 :hmm: , really can't wait to hear this sub on a JL 500/1 v2 in a sealed enclosure per your recommended enclosure specs :thumbs: . Thanx again for pointin' me in this direction. :metal:

Re: Our new 10" Xcon

Posted: Thu Sep 22, 2011 11:54 am
by denim
dvnt88 wrote:
denim wrote:
dvnt88 wrote:That's 1 sexxy sub and the price is waaaaaay lower than I expected :shock: . Is the sub purely for SPL or is it a mix of SPL and SQ? Might have to pick 1 up as I'm lookin' for a new 10" to replace my TIElite12D. :mrgreen:
This model line is not an SPL model, the Xcon's are SQ biased subs with good power handling. People have put up good numbers with them, but that was not the intention, that is what our Zcon is for. The Xcon is in that super sub class if you will, as in not peaky, LOVES the low low stuff, does not need bonkers power (I ran the original 12 for months will a mere 240 watts and people did not believe me), so essentially a great all around driver that has a mix of abilities but does not really sacrifice its original goal to please everyone. A good number of people are running them sealed.
Hey Bro - Just placed my order for this bad boy (10" 2 ohm DVC) to replace my TIElite 12D :shock: and was between the Xcon and a 10w7 :hmm: , really can't wait to hear this sub on a JL 500/1 v2 in a sealed enclosure per your recommended enclosure specs :thumbs: . Thanx again for pointin' me in this direction. :metal:

Wow, awesome. Thank you. We will process the order very shortly and get the build ticket in right away. :)

Re: Our new 10" Xcon

Posted: Thu Sep 22, 2011 3:16 pm
by dvnt88
denim wrote:
dvnt88 wrote:
denim wrote:This model line is not an SPL model, the Xcon's are SQ biased subs with good power handling. People have put up good numbers with them, but that was not the intention, that is what our Zcon is for. The Xcon is in that super sub class if you will, as in not peaky, LOVES the low low stuff, does not need bonkers power (I ran the original 12 for months will a mere 240 watts and people did not believe me), so essentially a great all around driver that has a mix of abilities but does not really sacrifice its original goal to please everyone. A good number of people are running them sealed.
Hey Bro - Just placed my order for this bad boy (10" 2 ohm DVC) to replace my TIElite 12D :shock: and was between the Xcon and a 10w7 :hmm: , really can't wait to hear this sub on a JL 500/1 v2 in a sealed enclosure per your recommended enclosure specs :thumbs: . Thanx again for pointin' me in this direction. :metal:

Wow, awesome. Thank you. We will process the order very shortly and get the build ticket in right away. :)

Sweeeeet. :twisted:

Re: Our new 10" Xcon

Posted: Thu Sep 22, 2011 9:07 pm
by Bfowler
you could substitute it in that old bmw saying

"buying a xcon(bmw) for spl(drag racing) is like taking a hooker fishing...its fun...but its not what you got it for

Re: Our new 10" Xcon

Posted: Fri Sep 23, 2011 4:11 am
by dvnt88
Bfowler wrote:you could substitute it in that old bmw saying

"buying a xcon(bmw) for spl(drag racing) is like taking a hooker fishing...its fun...but its not what you got it for
:lol: :lol: :lol:

Re: Our new 10" Xcon

Posted: Fri Sep 23, 2011 2:08 pm
by ttocs
Bfowler wrote:you could substitute it in that old bmw saying

"buying a xcon(bmw) for spl(drag racing) is like taking a hooker fishing...its fun...but its not what you got it for

are we talkin about a hot female hooker or a bad tranny with a 5 oclock shadow? :doh:

Re: Our new 10" Xcon

Posted: Wed Sep 28, 2011 11:20 am
by Mackenzie
Those look very nice. This is why I like internet brands , they seem to actually cater to all user applications much better.