Page 1 of 1
Why doesn't this work?
Posted: Mon Sep 19, 2011 8:06 pm
by Shrimpburgler
I bought a 15 farad powercore, zx 600, and a 500.4. I ran the power, ground, and remote to the powercore, but when i turn the car on theres a loud high pitch beep and no lights come on. I figured it was the charge I forgot but when I called a number on the site they said even without the charge there should still be some kinda light and that he thinks something is broken. Should I still try to charge it? whats the safiest way to charge, I've never done this before. Thanks.
Re: Why doesn't this work?
Posted: Tue Sep 20, 2011 9:24 am
by ttocs
in ford cars if you turn the key and here a beep it means you have warning light out.
Re: Why doesn't this work?
Posted: Tue Sep 20, 2011 2:00 pm
by davewaibel
you do not need to charge a power core- it automatically charges, and discharges- you either have a wired wrong, or you have a loose wire, internally, or you have something much worse going on- I have 3 of these things, and there is no noise when then engage, other than the solenoid slapping shut
Re: Why doesn't this work?
Posted: Tue Sep 20, 2011 2:38 pm
by ttocs
take the case off of the power core and inspect it as they are known to go bad.