Phoenix Gold Phorum

Any one familiar with the Audison Bit one component? I would like to know what is the best way to incorporate an Ipad 2 to my system and keep best sound quality possible. First, let's talk about my set up... The IPad 2 will now replace the deck so it will now become the deck, the heart and soul of my system. My set up right now is an alpine deck split front/rear/subs to a PG TLD66. Out of the PG TLD66, front goes to one PG Ti EQ30 then to amp (PG Reactor #1), rear goes to another PG Ti EQ30 then to amp (PG Reactor #2) and subs goes to a PG Ti Basscube then to amp (PG Reactor #3). Now that I'm replacing the deck with an IPad 2, with so many do's and don'ts, my question is, where or how do I proceed with a proper install of an IPad 2 in my install? I'm looking at buying an Audison Bit one but know absolutely nothing about that processor, but seems like a must when adding an Ipad. Will I need to eliminate the PG TLD66 or can it be install after the amp output of the Bit one prior going to the amps? I really would like to keep the 2 PG Ti EQ30 that are already install in my set up, but will that affect the EQ's already incorporated in the Bit one, can they be bypass or will have no affects? Also for video what do I do? I have 8 screens in the car, I do have two 8 way splitter boxes that allows me to switch between the IPad 2 and the PS3 (via aux 1/aux 2). What I would like to know is the best way to connect the IPad 2 by keeping the image on the Ipad while being displayed on the screens, not lose it. Any information's or tips would be great.

#2 confuses me....

ttocs wrote:#2 confuses me....

I answered my own question...#2 question scratch that....

But any input in regard of this processor would be great.

Thanks

I don't see why you couldn't add the TLD 66 after the Bit One. I see the Bit One only has 4 volt outputs so adding the TLD after the Bit One should help increase the voltage well beyond that.

I don't see the benefit of the TLD. You will already be at 4 volts and all you would add is more connections and need additional RCA's that could add noise. I would hook it up without it and see if you feel you need the additional signal strength.

Reading the owner manual....it seems like there's no need for the 2 PG Ti EQ30 either...

oh hell no there would be no reason for it other then quick on the fly adjustmenst. I will be using the 9887 with the mic-tuned EQ as well as an eq215ix but becase once you do the auto-tune you can't make any adjustmenst. That is not the case for you, once you set it up you CAN make adustments but well who cares its all cool and the gang don't mean to fuck yer shit up....

Bump...just edit the original text...so if anyone have any inputs...

Headphone jack out to RCA in on Bit1, to amps from there. Maybe an amplified signal splitter to go to the multiple Reactors, but other then that, it seems pretty straight forward to me. Def no for the line driver. Anything over 4v is a bit of a waste unless the particular amps need a hot signal (ZPA's do, but the ZX's don't).