blue/purple Sapphire amps

WhiteLX · Post by **WhiteLX** » Thu Jan 26, 2012 10:53 pm

What is the deal with the blue/purple Sapphire amps? I am been looking for a match for my SA1.0, but all of the ones I am finding are white. Are the blue/purple versions more rare or an earlier model?

Post by **kg1961** » Fri Jan 27, 2012 11:25 am

the purple one are 1st gen white was second

crosleykings · Post by **crosleykings** » Tue Jan 31, 2012 9:11 am

kg1961 wrote:the purple one are 1st gen white was second

Interesting. My white sapphire amp says rev A on the board, but my blurple ones are reV B and C. I always assumed the white one was the oldest.

Post by **kg1961** » Tue Jan 31, 2012 11:03 am

i might be wrong but that the way they were sold in canada i had a 1.5 or what ever the 5 channel was way before i could get it in white?

Post by **ttocs** » Tue Jan 31, 2012 11:08 am

always thought they were white myself. This amp has not been "franked" has it?

WhiteLX · Post by **WhiteLX** » Tue Jan 31, 2012 10:31 pm

ttocs wrote:always thought they were white myself. This amp has not been "franked" has it?

not that I am aware of. I bought it back in the mid 90s. My board says Rev A.

Mr. Wild · Post by **Mr. Wild** » Tue Jan 31, 2012 10:51 pm

You don't see many gold plated circuit boards in entry level amps these days! Not even in Elite amps. Them sapphires are not triple darlington i assume. Are they mosfet or what?

WhiteLX · Post by **WhiteLX** » Tue Jan 31, 2012 11:05 pm

Mr. Wild wrote:You don't see many gold plated circuit boards in entry level amps these days! Not even in Elite amps. Them sapphires are not triple darlington i assume. Are they mosfet or what?

Looks like mosfet

http://download.phoenixphorum.com/Manua ... Manual.pdf

also note the manual shows the same color amp.

Post by **Eric D** » Wed Feb 01, 2012 8:34 am

I don't know a whole lot about these amps, but they look to be pretty nice.

I think that is triple darlington actually. It looks to be the same general build and quality as a M25, but in a much nicer configuration (I don't like the loose wires in a M25, and these sapphire amps don't have that issue).

Post by **kg1961** » Wed Feb 01, 2012 8:34 am

thanks i thought i was loosing it getting older but i was sure the purple/blue was here first in Canada
we also got yellow zx amp

I think these amp were not made in the usa but i might be wrong on that

crosleykings · Post by **crosleykings** » Wed Feb 01, 2012 8:51 am

kg1961 wrote: I think these amp were not made in the usa but i might be wrong on that

Eric D wrote:I don't know a whole lot about these amps, but they look to be pretty nice.

I think that is triple darlington actually. It looks to be the same general build and quality as a M25, but in a much nicer configuration (I don't like the loose wires in a M25, and these sapphire amps don't have that issue).

I've noticed the 1.4x and 1.5x do have the loose wires, but the 1.0x doesn't. It's interesting how OP-amp dependent the 1.4 and 1.5x are. Looks like theres 2 on the input stage, 2 for the crossover, and two for each output channel. 12 total for the 1.4x! Notice the sockets

Post by **ttocs** » Wed Feb 01, 2012 9:35 am

pretty sure they didn't go offshore till the xenon or was it the RSD series?

dwnrodeo · Post by **dwnrodeo** » Wed Feb 01, 2012 9:58 am

ttocs wrote:pretty sure they didn't go offshore till the xenon or was it the RSD series?

Xenon/Octane were the first series to be made overseas.

trickyricky · Post by **trickyricky** » Mon May 07, 2012 5:34 pm

Am new to PG products (only used the old school PG, made in USA products) but I've never seen a blue sapphire amp. The pic posted in this thread looks like it was custom painted blue, but if the silk screening on the side panels are original then it might be factory coated.

By the way I have a 3.0x and it has a total of 6 op amps (since its a two channel amp).

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Mon May 07, 2012 6:10 pm

This color is straight from PG, they came in white or purple.

PhuckinGood · Post by **PhuckinGood** » Thu May 10, 2012 8:06 am

The Blue/purple colour was available alongside the white I picked up SA3.0x when they first came out and had a choice of colour, hop ethat clears that one up

trickyricky · Post by **trickyricky** » Sat May 12, 2012 9:36 pm

Both colors (white, and blue/purple) are amazing. Aslong as the powder coating is well done than the finish product must be amazing. So far am happy with my Xtant 600X1 amp.

IsakAlexander · Post by **IsakAlexander** » Wed Mar 06, 2013 11:26 am

I dont have it in front of me but the white one I got have two 30A fuses and a phoenix gold badge on the fins.

zeropoint0.5 · Post by **zeropoint0.5** » Wed Mar 06, 2013 1:11 pm

i have just one SA 3.0x recently, and was pretty surprized about it's perfomance pushing a subwoofer.....

It even seemed to me it pushed a bid harder then a ms275(benched 279W rms at 4 ohms) on the same sub......

For an "entry amp" and so little, not bad, really really not...... yes it surprized me......

LowandLoud · Post by **LowandLoud** » Wed Mar 06, 2013 1:41 pm

This was my very first amp

Exactly, 1.4x in blue/purple. I bought it used in 1997. It ran my whole system. 2 10" XS DVC's and sapphire 6.5 coax. Ever since then, i was hooked!

LL

blue/purple Sapphire amps

blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps

Re: blue/purple Sapphire amps