Power Acoustik Joke
Posted: Fri Mar 09, 2012 6:05 pm
A guy I work with brought me a Power Acoustik LT980.2 today to repair. It is his son's amp, and he had it running some 12s. Supposedly one day it just quit...
What a laugh. I opened the amp up and the power supply was toast. It uses some nice parts, but is just funny to behold.
There are 6 MOSFETs for the power supply, and 8 output BJTs. This puts it along the lines of a M100, or ZX350 as far as what it should do.
Well, it has 4 fuses, and he had 25A ones in all of them. I dug around online and found it should have 15A fuses.
Now for the funny part, one of the 4 fuses was not internally connected to anything. This is part of the amp's design. The fuse holder was wired to nothing. So, if you blow all your 15A fuses running the amp, one will remain to help you keep going. Truly funny stuff.
Also of note, the bass boost, gain, and all other controls were all the way up. Go figure?
Anyway, I got a chuckle from this so I had to post it.
Also, I put 6 new MOSFETs in it, and the amp is back in action. I also desoldered and removed 2 of the 4 fuse holders and then fashioned an internal plastic plate to cover the holes. At least now the most he will likely stick in there will be around 50A instead of 75A as before (thinking he had 100A).
What a laugh. I opened the amp up and the power supply was toast. It uses some nice parts, but is just funny to behold.
There are 6 MOSFETs for the power supply, and 8 output BJTs. This puts it along the lines of a M100, or ZX350 as far as what it should do.
Well, it has 4 fuses, and he had 25A ones in all of them. I dug around online and found it should have 15A fuses.
Now for the funny part, one of the 4 fuses was not internally connected to anything. This is part of the amp's design. The fuse holder was wired to nothing. So, if you blow all your 15A fuses running the amp, one will remain to help you keep going. Truly funny stuff.
Also of note, the bass boost, gain, and all other controls were all the way up. Go figure?
Anyway, I got a chuckle from this so I had to post it.
Also, I put 6 new MOSFETs in it, and the amp is back in action. I also desoldered and removed 2 of the 4 fuse holders and then fashioned an internal plastic plate to cover the holes. At least now the most he will likely stick in there will be around 50A instead of 75A as before (thinking he had 100A).