Page 1 of 1
can someone help with a box design?
Posted: Mon Jun 04, 2012 10:32 pm
by kg1961
someone with a box building program please chime in
i own and have had 2 jl audio 15w0 v1 subs. i had on in a 1.70cub seal box off 150watt and it sounded great
can some fine the best size (smaller) sealed that would not have a huge drop in db's. i would like to add fiber fill to save room also
please let me know what you have come up with as im trying to fit 2 in my civic sedan trunk
i have about 32"across 16"high and can do about 12-14" deep
here are the number for my sub 4ohm
http://mediacdn.shopatron.com/media/mfg ... 1317790098
thanks again
i have 150-300watt rms i can use for each
can someone help with a box design?
Posted: Mon Jun 04, 2012 10:52 pm
by 00goobs
I'd like some help with a box design as well, thanks in advance...
Re: can someone help with a box design?
Posted: Mon Jun 04, 2012 11:27 pm
by nutxo
00goobs wrote:I'd like some help with a box design as well, thanks in advance...
ME TOO!!!!!!!!!!!!
Re: can someone help with a box design?
Posted: Tue Jun 05, 2012 10:30 am
by ajaye
I don't have windows so I haven't been able to check this out, but I've read some decent things about winisd and its free.
http://www.linearteam.dk/default.aspx?pageid=winisd
Re: can someone help with a box design?
Posted: Tue Jun 05, 2012 11:02 am
by kg1961
sorry never used a program before what would i do to show a smaller box to see how the sub would work in it
what i would like to do is find the smallest box sealed that will only be a couple db less than the 2.5cub sealed and still get good output
Re: can someone help with a box design?
Posted: Wed Jun 06, 2012 12:27 pm
by ajaye
have you considered running them iso?
Re: can someone help with a box design?
Posted: Thu Jun 07, 2012 1:27 pm
by todd217
i modeled the v1 15w0 isobaric and in a 3cuft sealed the f3 is about 36hz and reaches xmax at 22hz with 400w total. just did another one in a 6th order isobaric bandpass with a 2.5cuft rear chamber tuned to 30hz and a 1.5 front chamber tuned to 60hz you have an almost 6db gain from about 40hz to 70hz with a 1.5 db dip around 50hz. this should she plenty loud enough.
Re: can someone help with a box design?
Posted: Fri Jun 08, 2012 2:57 pm
by freshkryp69
www.PWKDESIGNS.COM either buy his plans or have him "Pete" make it. CAD designed with his proprietary software Plans are like 50 bucks. He truly is 1 of the best in the world in enclosure design.
Re: can someone help with a box design?
Posted: Fri Jun 08, 2012 8:06 pm
by Stryker
holy shit
this isn't rocket science, there is tons of programs on the net' just google it and pick one....
Re: can someone help with a box design?
Posted: Fri Jun 08, 2012 8:46 pm
by ttocs
while a box certainly makes a big difference in output its decisions like this that I just like to build a nice sealed box and let my bass cube make any adjustments for what I feel it lacks.
Re: can someone help with a box design?
Posted: Sat Jun 09, 2012 6:42 am
by kg1961
Stryker wrote:holy shit
this isn't rocket science, there is tons of programs on the net' just google it and pick one....
Sorry Corey i have never used a box program. so i was asking people that have how would the smallest sealed box with little performance loss would be ...
can someone help with a box design?
Posted: Sat Jun 09, 2012 8:53 am
by 00goobs
I've heard a 6" sub in a transmission line box hit harder than a ported 10" w3v2, so I think there is some magic involved somewhere. I would like to know what are the popular modeling software out there for us to use.
Re: can someone help with a box design?
Posted: Sun Jun 10, 2012 6:29 pm
by KHPower
I have bassbox 6 pro and I dont mind designing boxes
we do it daily so send me your ideas and I can send you your design with graphs and everything including what your box is gonna sound like and what frequency and power your gonna need to hit the high score or just to sound good
kyle