Just snagged one for cheap (i think so) and was wondering if anyone has ever really done an output test on it. What would the real world numbers be at 13.8/14.4 volts?
I haven't read the manual yet (just downloaded it) but is the power supply regulated or unregulated?
And, do these amps suffer from "caps" disease like the others from this time frame? O feel they do, bit would like some clarification.
Thanks.
Sapphire SA1.5x UPDATE, it's here. 7-14-12
Sapphire SA1.5x UPDATE, it's here. 7-14-12
Last edited by smgreen20 on Sat Jul 14, 2012 12:14 pm, edited 1 time in total.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Re: Sapphire SA1.5x Qs.
man i used one man years ago
in a pontiac fiero with 4 jl 8wo-8 with mb quart mids in the dash it sounded great
im not sure on the output
in a pontiac fiero with 4 jl 8wo-8 with mb quart mids in the dash it sounded great
im not sure on the output
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: Sapphire SA1.5x Qs.
The power supply unregulated
Re: Sapphire SA1.5x UPDATE, it's here. 7-14-12
Here's what I just got today......
PG Sapphire SA1.5X
A bit pi$sed as the seller said it was benched before listed and all chs worked. As you will see, there's no way for that to be true. It was packed horribly to boot. The speaker terminal was busted at both ends upon arrival. I'll get it cleaned up and with the help of ampguts, be able to fix/repair/replace what's damaged. Caps will be replaced too. Any other tips thoughts, I'm open to suggestions.









I didn't spend a whole lot for it, but more then I would have knowing the condition it was in. The left chs seem to be fine, but one R ch is fried and the other R ch is on its way, along with the sub ch being shot. None of the fets look damaged though.
PG Sapphire SA1.5X
A bit pi$sed as the seller said it was benched before listed and all chs worked. As you will see, there's no way for that to be true. It was packed horribly to boot. The speaker terminal was busted at both ends upon arrival. I'll get it cleaned up and with the help of ampguts, be able to fix/repair/replace what's damaged. Caps will be replaced too. Any other tips thoughts, I'm open to suggestions.









I didn't spend a whole lot for it, but more then I would have knowing the condition it was in. The left chs seem to be fine, but one R ch is fried and the other R ch is on its way, along with the sub ch being shot. None of the fets look damaged though.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Re: Sapphire SA1.5x UPDATE, it's here. 7-14-12
Ignore the last pic, that's of an M50.
My purpose for this post is I need some help. If anyone has one of these amps, please let me know. Ampguts doesn't have a good enough pic for me go get the color bands off of some of the resistors.
My purpose for this post is I need some help. If anyone has one of these amps, please let me know. Ampguts doesn't have a good enough pic for me go get the color bands off of some of the resistors.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Re: Sapphire SA1.5x UPDATE, it's here. 7-14-12
Bump.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998