More MS2250

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
User avatar
ludeboost98
Posts: 117
Joined: Tue Feb 15, 2011 12:53 pm
Location: Baltimore , MD

More MS2250

Post by ludeboost98 »

So I finally own a schrouded MS2250 ! It's been put to use and is in need of some love . More the schroud than anything . The amp itself is in good condition 9/10 , and I can probably buff out the glass (light scratches) . Besides the usual tune up , caps/etc it does have other needs ...

It's is in need of some screws , before I go driving around to search for what I need, I want to ask the phamily ... I need ,

2 plexi screws
Image

2 gold schroud grill screws/ nuts
Image

1 speaker terminal screw
Image

Other than that ... Here is the rest of the amp . Sorry about the pics ,taken with my iPad ...
Image
Image
Image
Image
Image
Image
1x MS1000TA
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
User avatar
holmis
Posts: 754
Joined: Thu Jul 08, 2010 6:11 am
Location: Lillehammer, Norway
Contact:

Re: More MS2250

Post by holmis »

You should check with Valeks1 (www.altser.com). He has alot of different PG pars as he services them.


Nice MS2250 you got 8)
Old School PG Fan/Collector & Jeep fanatic...
Madman in a nuclear mode!!
2x FAS, 3xReactor, MS275, MS2125, M25, M44, 2xMPS2240, ZX450, 3xZX350, 2xZX250, 8xPG Original Jacket, Box full of BassQube`s Xmax8,10,12, 2 sets of BostonAcoustics 6.5.3 + + +

My Buyer & Seller Ratings : http://phoenixphorum.com/viewtopic.php?f=7&t=15269
My CV Recone service: www.cerwinvega.multi2net.com
User avatar
JayGold
Posts: 566
Joined: Tue Apr 27, 2010 8:57 am
Location: Midwest

Re: More MS2250

Post by JayGold »

I just picked up a 2250 as well, already pulled off the caps and received replacement sil-pads from nico boom.

You definitely have some leaking caps there, pop off the plexi/non-connection side end plate and wiggle the caps off the direction of the long way of the amp (from end plate to end plate direction), then pull them straight up carefully. Clean the board up with some 99% IPA and q-tips. From your pics it looks like the transistors have more thermal paste used throughout than mine, but I do see some sil-pads used as well. You'll need to obtain these or paste if you plan to replace the caps yourself.

As for the plexi screws, you can probably find those at a hardware store. I haven't had much luck finding the gold plated set screws or shroud hardware at any hardware store so like holmis said, you may get some form valeks1.

If you have a chance to take a "micro" clear pic of the Fan Control Board, I could use one as my 2250 did not come with the FCB and I would like to attempt to solder one together if I can find the parts and layout.
14 PG amps from M/MS/ZX/Ti/LE and counting....the addiction continues...
User avatar
ludeboost98
Posts: 117
Joined: Tue Feb 15, 2011 12:53 pm
Location: Baltimore , MD

Re: More MS2250

Post by ludeboost98 »

Soory , I missed this Jaygold , I can get my slr out tonight and snap what you need REAL close . stay tuned ...
1x MS1000TA
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
User avatar
JayGold
Posts: 566
Joined: Tue Apr 27, 2010 8:57 am
Location: Midwest

Re: More MS2250

Post by JayGold »

ludeboost98 wrote:Soory , I missed this Jaygold , I can get my slr out tonight and snap what you need REAL close . stay tuned ...
Thanks dood!
14 PG amps from M/MS/ZX/Ti/LE and counting....the addiction continues...
User avatar
ludeboost98
Posts: 117
Joined: Tue Feb 15, 2011 12:53 pm
Location: Baltimore , MD

Re: More MS2250

Post by ludeboost98 »

take your pic ... I took a lot to give different focal points . I'm by no way a photagrapher so here is what I came up with . Hope it helps ...

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

And now a little porn ...

Image

Image

Image

Image

Image

Image

Image
1x MS1000TA
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
lilviper
Posts: 270
Joined: Tue Nov 06, 2012 9:30 pm

Re: More MS2250

Post by lilviper »

does anyone have a schematic of the fcb? or a way to test the fans?
zeropoint0.5
Posts: 593
Joined: Fri May 13, 2011 12:03 am

Re: More MS2250

Post by zeropoint0.5 »

ludeboost98 wrote:take your pic ... I took a lot to give different focal points . I'm by no way a photagrapher so here is what I came up with . Hope it helps ...

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

And now a little porn ...

Image

Image

Image

Image

Image

Image

Image

very nice inside :thumbs:

but :pray: replace the ps caps

i'm getting scared if i see how they leak :doh: :doh: :doh: :doh: :doh:

don't even try it out with these caps in, don't.....
User avatar
ludeboost98
Posts: 117
Joined: Tue Feb 15, 2011 12:53 pm
Location: Baltimore , MD

Re: More MS2250

Post by ludeboost98 »

Absolutely !!! I know , I wouldn't dare !
1x MS1000TA
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:

Re: More MS2250

Post by mhyde71 »

i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.

I also know i have the gold screws you need and the two plexi screws you would need. I would have to dig thru some boxes but i know i have some of both of those.

ill check for the daughter board schematics.

m
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
zeropoint0.5
Posts: 593
Joined: Fri May 13, 2011 12:03 am

Re: More MS2250

Post by zeropoint0.5 »

mhyde71 wrote:i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.


m
where can you find the schematics tread ??

i could use that shematic also......
User avatar
JayGold
Posts: 566
Joined: Tue Apr 27, 2010 8:57 am
Location: Midwest

Re: More MS2250

Post by JayGold »

mhyde71 wrote:i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.

I also know i have the gold screws you need and the two plexi screws you would need. I would have to dig thru some boxes but i know i have some of both of those.

ill check for the daughter board schematics.

m
Please post link to daughter board schematics, please.
14 PG amps from M/MS/ZX/Ti/LE and counting....the addiction continues...
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:

Re: More MS2250

Post by mhyde71 »

been looking for it- i know i have... i may have to re-scan it and post as i know i have hard copy... hang on- looking

m
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
lilviper
Posts: 270
Joined: Tue Nov 06, 2012 9:30 pm

Re: More MS2250

Post by lilviper »

mhyde71 wrote:i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.

I also know i have the gold screws you need and the two plexi screws you would need. I would have to dig thru some boxes but i know i have some of both of those.

ill check for the daughter board schematics.

m

thanks for looking..

i could make my own.. im just lazy
lilviper
Posts: 270
Joined: Tue Nov 06, 2012 9:30 pm

Re: More MS2250

Post by lilviper »

Did anyone ever find the schematic? i think my fan controller died. :(
Post Reply