Phoenix Gold Phorum

So I finally own a schrouded MS2250 ! It's been put to use and is in need of some love . More the schroud than anything . The amp itself is in good condition 9/10 , and I can probably buff out the glass (light scratches) . Besides the usual tune up , caps/etc it does have other needs ...

It's is in need of some screws , before I go driving around to search for what I need, I want to ask the phamily ... I need ,

2 plexi screws


2 gold schroud grill screws/ nuts


1 speaker terminal screw


Other than that ... Here is the rest of the amp . Sorry about the pics ,taken with my iPad ...

You should check with Valeks1 (www.altser.com). He has alot of different PG pars as he services them.


Nice MS2250 you got

I just picked up a 2250 as well, already pulled off the caps and received replacement sil-pads from nico boom.

You definitely have some leaking caps there, pop off the plexi/non-connection side end plate and wiggle the caps off the direction of the long way of the amp (from end plate to end plate direction), then pull them straight up carefully. Clean the board up with some 99% IPA and q-tips. From your pics it looks like the transistors have more thermal paste used throughout than mine, but I do see some sil-pads used as well. You'll need to obtain these or paste if you plan to replace the caps yourself.

As for the plexi screws, you can probably find those at a hardware store. I haven't had much luck finding the gold plated set screws or shroud hardware at any hardware store so like holmis said, you may get some form valeks1.

If you have a chance to take a "micro" clear pic of the Fan Control Board, I could use one as my 2250 did not come with the FCB and I would like to attempt to solder one together if I can find the parts and layout.

Soory , I missed this Jaygold , I can get my slr out tonight and snap what you need REAL close . stay tuned ...

ludeboost98 wrote:Soory , I missed this Jaygold , I can get my slr out tonight and snap what you need REAL close . stay tuned ...

Thanks dood!

take your pic ... I took a lot to give different focal points . I'm by no way a photagrapher so here is what I came up with . Hope it helps ...























And now a little porn ...

does anyone have a schematic of the fcb? or a way to test the fans?

ludeboost98 wrote:take your pic ... I took a lot to give different focal points . I'm by no way a photagrapher so here is what I came up with . Hope it helps ...























And now a little porn ...

very nice inside

but replace the ps caps

i'm getting scared if i see how they leak

don't even try it out with these caps in, don't.....

Absolutely !!! I know , I wouldn't dare !

i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.

I also know i have the gold screws you need and the two plexi screws you would need. I would have to dig thru some boxes but i know i have some of both of those.

ill check for the daughter board schematics.

m

mhyde71 wrote:i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.


m

where can you find the schematics tread ??

i could use that shematic also......

mhyde71 wrote:i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.

I also know i have the gold screws you need and the two plexi screws you would need. I would have to dig thru some boxes but i know i have some of both of those.

ill check for the daughter board schematics.

m

Please post link to daughter board schematics, please.

been looking for it- i know i have... i may have to re-scan it and post as i know i have hard copy... hang on- looking

m

mhyde71 wrote:i know i have the schematic for the fan board (daughter board)- i believe it might even be posted in the schematics thread.

I also know i have the gold screws you need and the two plexi screws you would need. I would have to dig thru some boxes but i know i have some of both of those.

ill check for the daughter board schematics.

m

thanks for looking..

i could make my own.. im just lazy

Did anyone ever find the schematic? i think my fan controller died.