im trying to figure out what is the difference between the phoenix gold 215x, and the 215ix?
TIA NappyFro
difference between the eq215's
difference between the eq215's
Jvc KD-A95BT headunit
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Re: difference between the eq215's
215 is just an eq
215x has a cross over built in.
215ix has a cross over as well as a time delayed output to run rear speakers off of it. I use the ix as the heart of my system to break the signal out to the different amps. Great unit if you can get the IX just has more possibilities to what it can do.
215x has a cross over built in.
215ix has a cross over as well as a time delayed output to run rear speakers off of it. I use the ix as the heart of my system to break the signal out to the different amps. Great unit if you can get the IX just has more possibilities to what it can do.
what else can I say I am a grumpy asshole most of the time.
Re: difference between the eq215's
Cool cool thanks for the info. I scored one off of ebay a few months back, and was wondering what the difference was.
Jvc KD-A95BT headunit
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
-
- Posts: 918
- Joined: Mon Dec 18, 2006 9:41 pm
- Location: Boise, ID
Re: difference between the eq215's
215x crossover is set using resistor networks or rnets. If you want a different crossover point, you swap out the rnet "chip" for a different value. 215ix has a variable crossover. Much more practical for changing crossover points.
Re: difference between the eq215's
that I didn't know, only had the ix myself. I would recomend it as it fits my needs perfectly.
what else can I say I am a grumpy asshole most of the time.