What amp should i use?
What amp should i use?
Hi, i just bought an PG SD500/4 but i now can get a PG ms275 with new caps and very well looked after.
I have a new set of Audison voce AV K6 125WRMS 91db component set that i will use, i had a ZX450 many years ago and i loved it.
My question is:how does the sd500/4 compare to the ms275 is the ms worth paying 240$ for its in real good condition, have any of you tried the sd500/4?
Sorry if my english writing skills are bad im from Norway
I have a new set of Audison voce AV K6 125WRMS 91db component set that i will use, i had a ZX450 many years ago and i loved it.
My question is:how does the sd500/4 compare to the ms275 is the ms worth paying 240$ for its in real good condition, have any of you tried the sd500/4?
Sorry if my english writing skills are bad im from Norway
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
I have used most of pg amps they sound almost all the same they sound like a pg amp should.Alfaholic wrote:Hi, i just bought an PG SD500/4 but i now can get a PG ms275 with new caps and very well looked after.
I have a new set of Audison voce AV K6 125WRMS 91db component set that i will use, i had a ZX450 many years ago and i loved it.
My question is:how does the sd500/4 compare to the ms275 is the ms worth paying 240$ for its in real good condition, have any of you tried the sd500/4?
Sorry if my english writing skills are bad im from Norway
so I would use the sd500/4
for size and power its hard to beat
don't get me wrong love the ms but the ms275 is not a power house
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: What amp should i use?
Thank you for answering, i wanted the 800/5 but it was to expensive so i will look for a singel channel later.
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
ebay has a good deal every so often if they don't ship to you I or other can get it and send it out to youAlfaholic wrote:Thank you for answering, i wanted the 800/5 but it was to expensive so i will look for a singel channel later.
just remember im not in the us im in Canada so just a heads up
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: What amp should i use?
I bought the sd500 on ebay from the USA, they got a new shipping where you pay the import charges to ebay and then the seller ships item to ebay who ships it to me.kg1961 wrote:ebay has a good deal every so often if they don't ship to you I or other can get it and send it out to youAlfaholic wrote:Thank you for answering, i wanted the 800/5 but it was to expensive so i will look for a singel channel later.
just remember im not in the us im in Canada so just a heads up
The stupid thing is the import charges and VAT are so expensive in Norway so i almost payed the same for shipping and customs as i payed for the amplifier.
The only reason i bought it is that the PG amps are much cheaper from USA then they are in Norway and i cant find a dealership for PG in Norway.
I know there was a company that sold PG amp 17years ago, a friend bought a M44 and the price was sick but it sounded real good i remember he had it mounted in the rear window.
Thank you for the tip about sending it via a member here on the forum , i will see if i can buy from a member here i will have look in the for sale section
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
was it bad enough to consider sending the board and the case separately as non-functioning parts instead of a good amp?
what else can I say I am a grumpy asshole most of the time.
Re: What amp should i use?
I've owned a SD500.4 and I currently own an SD1300.5. The SD's sound good, you will not be disappointed in the quality.Alfaholic wrote:Hi, i just bought an PG SD500/4 but i now can get a PG ms275 with new caps and very well looked after.
I have a new set of Audison voce AV K6 125WRMS 91db component set that i will use, i had a ZX450 many years ago and i loved it.
My question is:how does the sd500/4 compare to the ms275 is the ms worth paying 240$ for its in real good condition, have any of you tried the sd500/4?
Sorry if my english writing skills are bad im from Norway
XS2300, XS2500, XS2300, X200.4, X100.2, Ti21000.4, Roadster 66
I'm gonna become a civil engineer. I'm gonna design septic tanks for playgrounds. Little kids can take shits! You idiot, what the hell do you do?
I'm gonna become a civil engineer. I'm gonna design septic tanks for playgrounds. Little kids can take shits! You idiot, what the hell do you do?
Re: What amp should i use?
Its better to write that its broken and write it under 25$ in value then its free from any vat and fees, i always ask the ebay seller if the can send it as gift, sampler or with low value but its against ebay rules.ttocs wrote:was it bad enough to consider sending the board and the case separately as non-functioning parts instead of a good amp?
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
I see it got shipped from the US yesterday cant wait to get it, i got it for 81$ it was a display model in a store and the seller tested it before shipping it soo i hope its in working order.dwnrodeo wrote:I've owned a SD500.4 and I currently own an SD1300.5. The SD's sound good, you will not be disappointed in the quality.Alfaholic wrote:Hi, i just bought an PG SD500/4 but i now can get a PG ms275 with new caps and very well looked after.
I have a new set of Audison voce AV K6 125WRMS 91db component set that i will use, i had a ZX450 many years ago and i loved it.
My question is:how does the sd500/4 compare to the ms275 is the ms worth paying 240$ for its in real good condition, have any of you tried the sd500/4?
Sorry if my english writing skills are bad im from Norway
I get the component set tommorow and im starting on the soun damping of the doors tonight, im thinking about doing roof and boot to its an alfa romeo 156
Thank you guys for the replys
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
i like ms sries from pehoenix gold best, then m series
Sounds like music...
Re: What amp should i use?
Renovatio wrote:i like ms sries from pehoenix gold best, then m series
I see there is an M2125 recaped on ebay but its 400$, when it comes to looks i like the m series the are nice amps.
I also see there is a ROUTE 66 ANNIVERSARY EDITION on ebay i would love to have that one its soo nice but a bit out of my price range.
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
Got the speakers and dampening mats for the front doors, i also bought some high quality speaker wires, hope i get done with the mats in the doors this weekend.
The speakers cost me 500$ so they better be good
The speakers cost me 500$ so they better be good
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
Nice speaker lmk how they sound i would love a set
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: What amp should i use?
they sound like hertz component sets hsk. A bit dry sound in my opinion. I was looking at them, but change my mind to scan speak Revelator and Illuminator tweeter.
Sounds like music...
Re: What amp should i use?
Hertz and audison is the same company many of the speakers are the same but i cant find hertz that are the same as Voce AV K6, these won the EISA award for best "in car speaker system" but this was in 2011
For my use they are more then good enough, i was going to buy the new focal PS165F flax cone but i got a deal on the Audison.
Cant wait to get the amplifer now, im gonna need more dampening mats and they are not cheap over here, i got enough for the front doors and some for the boot but im thinking about doing the roof and wheel arches to.
For my use they are more then good enough, i was going to buy the new focal PS165F flax cone but i got a deal on the Audison.
Cant wait to get the amplifer now, im gonna need more dampening mats and they are not cheap over here, i got enough for the front doors and some for the boot but im thinking about doing the roof and wheel arches to.
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
the antivibration material best working with other sound deadning materials, foam material and sound reflective material (ccfl). I always put damping on door card too.
- Attachments
-
- Even door cards had a heavy sound deadning material on.
- IMG_5943.JPG (216.16 KiB) Viewed 7111 times
Sounds like music...
Re: What amp should i use?
The mats i got is made in alybutyl and foam, in my doors on the alfa romeo 156 there are no doorcard that i can take of its all in one piece but i will take the inside and outside.Renovatio wrote:the antivibration material best working with other sound deadning materials, foam material and sound reflective material (ccfl). I always put damping on door card too.
There are big holes in the built in door card will that affect the sound in a negative way?, i can take a picture of the door in a bit and post it.
By doorcard you mean the plate window motor and window lifter is mounted to?,
Thanks for your help
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
it goes like that: one layer inside doors of antivibration mat, then goes special foam to prevent speaker form resonance and extra distortion behind the speaker, i use extra layer behind the speaker with wavy surface its even better than flat. ant then surface between door card, one layer of antivibration, use extra damping mat around speaker 15 cm to prevent vibrations to further door places. for big holes i try to make a covering, that in the furure would'nt be a problem to take out glass if needed. and then goes ccfl 4 mm. mat. its like sound reflecting. and the door card always takes a full deadning covering. sory maybe its boring for other that have don this job for many times. ading some pics:
- Attachments
-
- behind the speakers wavy foam mat.
- IMG_5922.JPG (185.82 KiB) Viewed 7102 times
-
- damping mat. inside the doors
- IMG_5892.JPG (176.3 KiB) Viewed 7102 times
-
- foram inside the doors
- IMG_5898.JPG (213.34 KiB) Viewed 7102 times
-
- damping between door card
- IMG_5901.JPG (183.91 KiB) Viewed 7102 times
-
- ccfl 4mm. sound reflective mat.
- IMG_5926.JPG (145.99 KiB) Viewed 7102 times
Sounds like music...
Re: What amp should i use?
Thats dedicated building, i will go back to the drawing board then lol.
I will buy some foam and i got some cross patern material so i will put that in the back of speakers.
I see i got a big problem i cant mount the speakers on the doorplate the way it is now, it looks like i must weld a ring in so i can moumt the speaker on the ring.
The old speakers was mounted in the door card and im affraid it will cause much vibration, it so soft and its only mounted with small screws.
I will have to sleep on it but it looks like the only way it will sound and look good, i just orderd 4m X 4m with sound dampening and 1,5m X 1,5m with foam.
Im sorry about the metric measure
I will buy some foam and i got some cross patern material so i will put that in the back of speakers.
I see i got a big problem i cant mount the speakers on the doorplate the way it is now, it looks like i must weld a ring in so i can moumt the speaker on the ring.
The old speakers was mounted in the door card and im affraid it will cause much vibration, it so soft and its only mounted with small screws.
I will have to sleep on it but it looks like the only way it will sound and look good, i just orderd 4m X 4m with sound dampening and 1,5m X 1,5m with foam.
Im sorry about the metric measure
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
you can take a picture and post here. for my car i had to cut all the unnecessary plastic to mount the ring from mdf on the metal surface and its possible to make your own custom grills. definitely some angle about 25 to 30 degree to midwoofer would be better to listener, you win more low frequencies and mid frequencies, of course its much more work to do that
Sounds like music...
Re: What amp should i use?
forgot to mention, dont stop water drain in the doors with foam or damping, just keep 2 cm up from the bottom of the doors.
Sounds like music...
- Bfowler
- Briaans..... BRIAAAAANNNNNNS
- Posts: 10764
- Joined: Wed Dec 06, 2006 11:06 am
- Location: So easy, a cavewomen could do him
Re: What amp should i use?
those are some damn dead doors. nice work!
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
i've had tougher choices at a soda machine...
Re: What amp should i use?
i had no problems with ratles in thous doors, like 0 rattles with 120 rms thanks by the wayBfowler wrote:those are some damn dead doors. nice work!
Sounds like music...
Re: What amp should i use?
Do they sell mdf rings with an angle in them somewhere or can u i put something under the spacers and use compound to fill around the opening?
zpa0.5(V210245)
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
zpa0.3(00618)
zx600ti x2
600titanium
zx400ti
sd500.4
XSC5 x2
pld1
sdt-ti
tba
bass cube
tld66
Re: What amp should i use?
i have seen them selling only mdf rings, but i never bought from internet, i do it my self and all the pod i try to do only with mdf. having one ring mounted straight and other with angle between them i use appropriate shape mdf detail. lots of cutting, sanding, till it fits perfecly. i could help you if you were closer to me
Sounds like music...