Need a hand to find some parts for a ms2125 board

[kg1961]

so I shipped a ms2125 to kurten75
in shipping there was some damage
I took off the power bar and terminals but the tape I used to hold them to the bottom plate came loose
I'm not sure what was damage maybe he can post some pics
I'm guessing the amp must have been dropped as even if the tape let do it would need some large energy to get the terminal to hit something and damage an item on the board.

So I ask when pics are up if any of the ms guy could chime in on the part numbers if you have it and how much
on a pm to me
I would like to get this amp back together again

thanks again
Mike

[Drock]

Sent from my iPhone using Tapatalk

[kg1961]

anyone have the switch for stereo /bridged or know were to order one?

[Kurten75]

Hi all.

I'll keep you all updated when finished.

[kg1961]

Hi all.

I'll keep you all updated when finished.

thanks lmk
sorry again
Mike

[trickyricky]

I got a few new ones but they are vertical instead of horizontal on the position of the switch (these will work...the switch will be inside and could be switch from the outside with a small flat head screw driver..I know because I had to do this to a MS275 that was missing the switch and traces perhaps the same story). Two bucks and you can have one....or I can remove one from a spare board for 3.00, have to charge something for them otherwise everyone may start asking for free switches, lol.

You might have luck finding it at Mousers...just have to take precise measurements (pin spacing, height, mounting pins spacing, switch size and length).

[kg1961]

I got a few new ones but they are vertical instead of horizontal on the position of the switch (these will work...the switch will be inside and could be switch from the outside with a small flat head screw driver..I know because I had to do this to a MS275 that was missing the switch and traces perhaps the same story). Two bucks and you can have one....or I can remove one from a spare board for 3.00, have to charge something for them otherwise everyone may start asking for free switches, lol.

You might have luck finding it at Mousers...just have to take precise measurements (pin spacing, height, mounting pins spacing, switch size and length).

thanks a oem on would be better but I will wait to see what he needs

thanks again

[kg1961]

trick
I sent you a pm with the address I need the oem switch sent to
please let me know how much it costs to ship I will send funds asap
mike

[Kurten75]

Update:

The MS2125 just passed the soundcheck.
I feared the worst when I opened it up, and saw some bent components and scratches to the board from the loose connectors.

All checked out fine, and now producing load and warm sound.

All that is missing now is the new stereo/bridge switch (Mike's already on it)

Kurt

[trickyricky]

I should be shipping out an oem switch tomorrow.

[trickyricky]

I should be shipping out an oem switch tomorrow.

[kg1961]

I should be shipping out an oem switch tomorrow.

Thanks again lmk what i owe you

[kg1961]

switch is paid for and will be shipped very soon thanks again everyone

[trickyricky]

Switch is on its way. I double boxed it and use plenty of bubble wrap to ensure a safe delivery (as long as package doesn't get tampered with by costumes). Let us know how it arrives.

[Kurten75]

Will do.

Thank you.