Phoenix Gold Phorum

I want to inform anyone who has purchased an LPL44 or BC remote from me that the cord I sent you is the ONLY cord that will work with the custom controls I've made.


IT IS NOT the same cord that PG uses...if you use a different cord the LPL44 will work backwards (to boost you'll have to go counterclockwise)...this is an easy fix if you don't have another cord...PM me for info.


DO NOT USE a PG cord or similar layout on the jacks with the BC remote...IT WILL NOT WORK PROPERLY. If you don't have a cord or I did send you one with your remote (because I didn't have any in stock when I made them) then contact me and I'll send you a cord for 4.00 shipped.


SORRY if any one has experience issues with the BC remote...this may be the case if so them please contact me and I'll send you info on how to fix this problem or ship you a cord. Thanks and sorry for the confusion.

Okay sorry for the delay.

It appears that the BC Remotes do have ends that when placed face to face the colors need to align.


NOW am not 100% sure and would like to ask if anyone has an ORIGINAL bass cube cord to please picture both ends together. I ask because when I switched the wires (making them not opposite when face to face) and that one seems to work (turn on the LED and get boost). But when made a cord that when face to face that didn't align that cord did not work.


SO please if anyone has an original bass cube cord please post pic of both ends. This will solve the problem once and for all concerning the BC remotes.


I am making them with the same exact circuit as PG with the same exact pin lay outs.