LPL on XS2500 no workie !
-
- Posts: 66
- Joined: Wed Jun 19, 2013 6:19 pm
- Location: Meridian,ID
LPL on XS2500 no workie !
Shouting out to the experts here! Bought a XS 2500 off E-bay awhile ago , everything works good on the amp except for the LPL , I Can control the bass off the deck , but I really like the bass knob. Anyone know what I should look for to fix this before I send it to Ricky to fix it ! Ricky has no idea I might be sendinding it to him LOL !!
Pioneer AVH 5600
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
-
- Posts: 1653
- Joined: Sun May 06, 2012 8:01 am
Re: LPL on XS2500 no workie !
Now I do, lol....it has voltage across certain pins....have you checked the actual LPL44 remote if its an original with the wires soldered directly to the pot then one of them may be broken loose but with the shrink sleeve you may not notice.
-
- Posts: 66
- Joined: Wed Jun 19, 2013 6:19 pm
- Location: Meridian,ID
Re: LPL on XS2500 no workie !
Yeah it's good , because I had a ax204 hooked up with the LPL plugged into that and it worked fine. Maybe I'll check the plug on the amp itself. Those don't usually mess up do they ??
Pioneer AVH 5600
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
-
- Posts: 1653
- Joined: Sun May 06, 2012 8:01 am
Re: LPL on XS2500 no workie !
No but its possible...here's a diagram I drew up, so you can check those components first if you can.
Re: LPL on XS2500 no workie !
Just out of silly curiosity. The low pass on the amp is on right. I did this once using the low pass on my deck and had the amp crossover off
2008 toy tundra
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies
-
- Posts: 1653
- Joined: Sun May 06, 2012 8:01 am
Re: LPL on XS2500 no workie !
Weaklink wrote:Just out of silly curiosity. The low pass on the amp is on right. I did this once using the low pass on my deck and had the amp crossover off
AWESOME!! Hopefully that is it...didn't even remember the lowpass has to be on in order for the LPL44 to work.
Re: LPL on XS2500 no workie !
Yea I felt pretty silly when I remembered lpl stood for low pass level. I had to laugh at myself in that one.
2008 toy tundra
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies
-
- Posts: 66
- Joined: Wed Jun 19, 2013 6:19 pm
- Location: Meridian,ID
Re: LPL on XS2500 no workie !
I'm pretty sure it is ! I will check it out tomorrow! That would be funny if that's it ! Lol
Pioneer AVH 5600
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
Re: LPL on XS2500 no workie !
it could be as simple as a connection that went bad since you removed it last time.
what else can I say I am a grumpy asshole most of the time.
-
- Posts: 66
- Joined: Wed Jun 19, 2013 6:19 pm
- Location: Meridian,ID
Re: LPL on XS2500 no workie !
Kind of embarrassing ! It was the LPL button. SORRY !
Pioneer AVH 5600
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
-
- Posts: 1653
- Joined: Sun May 06, 2012 8:01 am
Re: LPL on XS2500 no workie !
Am glad weaklink brought that up.
-
- Posts: 66
- Joined: Wed Jun 19, 2013 6:19 pm
- Location: Meridian,ID
Re: LPL on XS2500 no workie !
Yeah for sure ! Way to go weaklink !
Pioneer AVH 5600
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
Ms250
MS2125
2-XS2500
2- XS2300
1- ZX475TI
2-Ax204a
1PG capacitor
JL woofs , Hertz highs
1 RF BD1001
MTX 2180
Re: LPL on XS2500 no workie !
No prob. I've done it before myself. Glad I could help.
2008 toy tundra
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies
Kenwood dnx-9980hd
Hertz hi energy 3-way
Hertz hi energy coax
M50 ser# M500001
M25 ser#M2500001
Outlaw x3
Bandit x4
Route 66 x2
M100x3
M44x2
M50 x4
M25 x5
Powercore 15
Ti Basscube
And other goodies