Page 1 of 1
Elite mid blown already? 6"
Posted: Mon Sep 24, 2007 1:51 pm
by smgreen20
Well.......
I think it's blown. I set the gains on the ZPA0.3 to 200wrms per side and the drivers side mid sounds shot. I don't go past 56 out of 62 on the Pioneer HU P980BT.
I'm thinking about putting the RSD 6 mid in its place on both sides. Wondering about the side effects that that would have on the Elite XO and tweet?
I'm going to look into warranty from woofersetc where I got them.
Posted: Mon Sep 24, 2007 1:54 pm
by Bfowler
something i noticed that seems to happen on them is the surround becomes unglued. check that first
Posted: Mon Sep 24, 2007 2:01 pm
by bdubs767
Someone may be willing to sell one spare mid....maybe
Posted: Mon Sep 24, 2007 4:41 pm
by Wakeup
Bfowler wrote:something i noticed that seems to happen on them is the surround becomes unglued. check that first
So does regluing them fix that?
Posted: Mon Sep 24, 2007 4:55 pm
by Bfowler
yessir
Posted: Mon Sep 24, 2007 5:34 pm
by Wakeup
ooh...goodie...! I have one bad one, and one that the glue seemed to come undone. What kind of glue would you use?
And picked up a spare 5" from a local. See my post in the auctions section. About the 3x ms1000's
Posted: Mon Sep 24, 2007 5:51 pm
by Bfowler
i used a 2 part epoxy on mine, applied with a q-tip with the cotton part torn off (so just the stick part)
Posted: Mon Sep 24, 2007 7:51 pm
by Wakeup
got any spare 2 part epoxy?! hehe
Posted: Thu Sep 27, 2007 12:44 pm
by smgreen20
The surround is a ok.
Posted: Thu Sep 27, 2007 1:44 pm
by HoseHead
Automotive Goop.
It stays fexible after drying and holds anything to anything.
Eclectic Products Inc.
Pineville LA 71361
1-800-767-4667
Posted: Fri Sep 28, 2007 5:47 am
by gixerboy
check the tinsel on the back of the cone,sometimes it slaps off the cone as it moves and makes a crap noise
Posted: Fri Sep 28, 2007 7:51 am
by Bfowler
HoseHead wrote:Automotive Goop.
It stays fexible after drying and holds anything to anything.
Eclectic Products Inc.
Pineville LA 71361
1-800-767-4667
sounds like lots of fun to use on things other then speakers!