M25

Post by **Rold Gold** » Mon Mar 31, 2008 9:38 am

I can't ever remember seeing "Series II" on the M series amps. Whats the difference between them?

Post by **AVICJR** » Mon Mar 31, 2008 12:18 pm

The series 1 had the power, ground, and remote already wired into the inside of the amp (three wires hanging out) whereas the series 2 had the terminal blocks to connect these to.

Post by **AVICJR** » Mon Mar 31, 2008 12:32 pm

Here's a pic of an M25 Series I for clarification.

Post by **fuzzysnuggleduck** » Mon Mar 31, 2008 12:41 pm

Were there "Series I" versions of all M amps or just the M25 or... ?

Post by **Rold Gold** » Mon Mar 31, 2008 12:41 pm

Thanks Mando!

I'm trying to get the one off ebay but we'll see. I can only spend $75 shipped so we'll see.

dgoodhue · Post by **dgoodhue** » Mon Mar 31, 2008 1:02 pm

The power ratings of the Series II gave rating of 14.4 V so they were higher. They look pretty similliar inside, but I never really went over them with a tooth and comb when they were side by side.

Post by **AVICJR** » Mon Mar 31, 2008 1:48 pm

fuzzysnuggleduck wrote:Were there "Series I" versions of all M amps or just the M25 or... ?

To date I have only seen Series I versions of M25's never any other M amps.

thadrizzle · Post by **thadrizzle** » Fri Apr 18, 2008 8:56 pm

My good friend just bought an amp like this off someone and I put power to it to see if it works but, even w/ all these forums I cannot find a simple list of specs......Anyone know them or have a good site. I am really just concerned w/ the rms output X2 and bridged..
Thankx and nice to be here in you forum this is my 1st post.

nutxo · Post by **nutxo** » Fri Apr 18, 2008 9:07 pm

thadrizzle wrote:My good friend just bought an amp like this off someone and I put power to it to see if it works but, even w/ all these forums I cannot find a simple list of specs......Anyone know them or have a good site. I am really just concerned w/ the rms output X2 and bridged..
Thankx and nice to be here in you forum this is my 1st post.

theres a link to all the manuals in this section

Post by **Wakeup** » Fri Apr 18, 2008 9:57 pm

thadrizzle wrote:My good friend just bought an amp like this off someone and I put power to it to see if it works but, even w/ all these forums I cannot find a simple list of specs......Anyone know them or have a good site. I am really just concerned w/ the rms output X2 and bridged..
Thankx and nice to be here in you forum this is my 1st post.

Welcome to the forums!!! Ya most of us here are pretty close and we all have a good time here together... FOR THE MOST PART!

Anyway here's a link to the M Manuals:
http://download.phoenixphorum.com/Manua ... rs/M_Amps/

dgoodhue · Post by **dgoodhue** » Sat Apr 19, 2008 9:02 am

M25 are 65 x 2 and 140 x 1 (I think they might be a little under rated).

I really like my M25's, they sound great on the front PG RSD65cs that I have (they aren't they loudest amps in the world but get loud enough for me) I tried the M25 on my RSD10 and didn't get loud enough, the subs today demand too much power for a M25.

Marcotah · Post by **Marcotah** » Sat Apr 19, 2008 5:10 pm

dgoodhue wrote:M25 are 65 x 2 and 140 x 1 (I think they might be a little under rated).

I really like my M25's, they sound great on the front PG RSD65cs that I have (they aren't they loudest amps in the world but get loud enough for me) I tried the M25 on my RSD10 and didn't get loud enough, the subs today demand too much power for a M25.

What about it SQ?
Im waiting for my Titaium Comp Elite Set to use a "twin amp" config.Each amp will power a side of my comp set.

Post by **AVICJR** » Sat Apr 19, 2008 11:57 pm

Marcotah wrote:What about it SQ?

SQ wise the M25's are superb! Bridged per side will sound great.

M25

M25

M25 Series II

Re: M25 Series II

Re: M25 Series II