Where to Buy new Caps for M50

bruther · Post by **bruther** » Fri May 02, 2008 7:08 am

If I wanted to replace the caps myself for an M50 where would I buy the Caps and does anyone know which caps to buy for the M50?
Thanks
brian

dwnrodeo · Post by **dwnrodeo** » Fri May 02, 2008 7:46 am

http://www.soundbuggy.com/Eric/Car%20Au ... index.html

These will work!

bruther · Post by **bruther** » Fri May 02, 2008 9:45 am

So these caps Nichicon UHE1C562MHD6 capacitors will work for the M-50?
Thanks
brian

dgoodhue · Post by **dgoodhue** » Fri May 02, 2008 10:09 am

They work for the power Supply Caps (which when leak are at risk to burn the board) They are recommended to be replaced on every M Series amps. The replace the other caps base on a visual inspection (usually the wrapper shrinks)

bruther · Post by **bruther** » Fri May 02, 2008 10:15 am

I see the link you sent me says Kester 44 but I see there are a lot of different types of Kester 44. DO you have a link to the type of Kester 44 to purchase?
Thanks
Brian

dwnrodeo · Post by **dwnrodeo** » Fri May 02, 2008 11:14 am

Just use any rosin core solder that is small enough in diameter. I can't remeber what exact size I used, but I picked it up at Radio Shack for $5. You can also get the solder wick there too for cheap.