Page 1 of 1
Where to Buy new Caps for M50
Posted: Fri May 02, 2008 7:08 am
by bruther
If I wanted to replace the caps myself for an M50 where would I buy the Caps and does anyone know which caps to buy for the M50?
Thanks
brian
Posted: Fri May 02, 2008 7:46 am
by dwnrodeo
Posted: Fri May 02, 2008 9:45 am
by bruther
So these caps Nichicon UHE1C562MHD6 capacitors will work for the M-50?
Thanks
brian
Posted: Fri May 02, 2008 10:09 am
by dgoodhue
They work for the power Supply Caps (which when leak are at risk to burn the board) They are recommended to be replaced on every M Series amps. The replace the other caps base on a visual inspection (usually the wrapper shrinks)
Posted: Fri May 02, 2008 10:15 am
by bruther
I see the link you sent me says Kester 44 but I see there are a lot of different types of Kester 44. DO you have a link to the type of Kester 44 to purchase?
Thanks
Brian
Posted: Fri May 02, 2008 11:14 am
by dwnrodeo
Just use any rosin core solder that is small enough in diameter. I can't remeber what exact size I used, but I picked it up at Radio Shack for $5. You can also get the solder wick there too for cheap.