Updating Big Three

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
User avatar
dwnrodeo
Posts: 1932
Joined: Thu Nov 01, 2007 10:35 am
Location: MI

Updating Big Three

Post by dwnrodeo »

Quick question for you guys. I'm going to be updating under hood power
this weekend and saw Errin's Proper Power How To and I have one question.
It states to run a cable from battery positive to alternator, and from battery
negative to alternator, and from battery to chassis. I plan on running 1/0
from positive of battery and from negative of battery to the back of the
car for the amps. Do I really need to update the battery negative to chassis
if I am running a cable from the negative of battery to the back of the car?
It seems kind of redundant to me and I wouldn't have any other openings on my
battery terminal.
gkitching
Hair Metal
Hair Metal
Posts: 1266
Joined: Thu Jul 19, 2007 12:43 pm

Post by gkitching »

I would have to agree. If you're gonna run ground back to the amps then beefing up the battery ground to chassis would be redundant.
Greg Kitching
User avatar
dwnrodeo
Posts: 1932
Joined: Thu Nov 01, 2007 10:35 am
Location: MI

Post by dwnrodeo »

That's what I thought, but wanted to make sure. I just thought it'd be weird if I did the "Big 3" but only updated two things. :D
Thanks Greg.
User avatar
Fatii
Posts: 101
Joined: Sun Sep 09, 2007 11:24 am

Post by Fatii »

is it a advantage of taking ground from the battery to the amp? or old rusty car? ;)
Francious70
Half Baked
Posts: 3533
Joined: Wed Dec 06, 2006 2:58 pm
Location: TN, YEEEEEEEEEEEEEEEEEEHAW!!!!
Contact:

Post by Francious70 »

dwnrodeo wrote:That's what I thought, but wanted to make sure. I just thought it'd be weird if I did the "Big 3" but only updated two things. :D
Thanks Greg.
While it may seem redundant, it really does help the overall efficiency of your car's electrical system. And as we all know, get a few points of efficiency is worth a few cents of wire. :lol:
Boomshackalacka
User avatar
Irongoats
Posts: 245
Joined: Wed Mar 05, 2008 12:25 am
Location: Las Vegas, NV

Post by Irongoats »

A true Big-3 if you will calls for you too;

Battery to Alt (pos)
Battery to Block (neg)
Block to chassis (neg)


You can check this out at 12volt.com or many truck forums. This is the way I did it plus don't forget to upgrade your battery as well. Your negative should be as short as possible in regards to your amp.

Please remember to not disregard your original wires, its not set up to work that way. You run your positive right over your original pos to alt. I have a couple of pics under install forum titled; my little install part 1. This is the usual way of doing it so I went with it as well. Have fun.
User avatar
dwnrodeo
Posts: 1932
Joined: Thu Nov 01, 2007 10:35 am
Location: MI

Post by dwnrodeo »

A true Big-3 if you will calls for you too;

Battery to Alt (pos)
Battery to Block (neg)
Block to chassis (neg)
Yes that's true, but wouldn't one wire from Alt (neg) to battery (neg) basically do the same thing as Battery to Block (neg) and Block to Chassis (neg)???
The only reason I haven't upgraded Battery to Chassis is because I used up all of the mounts on my battery terminal.

And don't worry, I kept all of the original wires when I upgraded.
User avatar
Irongoats
Posts: 245
Joined: Wed Mar 05, 2008 12:25 am
Location: Las Vegas, NV

Post by Irongoats »

Check this out, it'll explain all what it entails.

http://www.the12volt.com/installbay/for ... 73496~PN~1
gkitching
Hair Metal
Hair Metal
Posts: 1266
Joined: Thu Jul 19, 2007 12:43 pm

Post by gkitching »

Assuming the factory knows what is required to run the vehicle (a safe assumption I think) Upgrading the wiring from the alt. to the battery and running both positive and negative from the battery to the rear, dwnrodeo has essentually isolated/optimized the current flow for his audio system and eliminated any outside influences from the vehicle side. Doing any more would not bennifit the audio system anymore. If he is looking to improve the vehicle's charging system for bigger spark at the plugs etc, then the other things would be advantagious.
Greg Kitching
User avatar
Fatii
Posts: 101
Joined: Sun Sep 09, 2007 11:24 am

Post by Fatii »

gkitching wrote:Assuming the factory knows what is required to run the vehicle (a safe assumption I think) Upgrading the wiring from the alt. to the battery and running both positive and negative from the battery to the rear, dwnrodeo has essentually isolated/optimized the current flow for his audio system and eliminated any outside influences from the vehicle side. Doing any more would not bennifit the audio system anymore. If he is looking to improve the vehicle's charging system for bigger spark at the plugs etc, then the other things would be advantagious.

oki.. =)

hm hope my new avatar is working

* working.. :)
Post Reply