Page 1 of 1
proper use of a tidd10
Posted: Tue Dec 12, 2006 10:26 am
by Bfowler
so what is the correct way to use one of these to power something with only a + & -? (LEDs fans, etc)
use an external relay or is there a better way?
Posted: Tue Dec 12, 2006 10:40 am
by VW337
use the swtiched 12+ and the 12- for fan or LED(s).
Posted: Tue Dec 12, 2006 10:47 am
by Bfowler
that is what i have been doing, but i was worried that that wasnt provided enough power, but if you say yay, then i will keep doing it
Posted: Tue Dec 12, 2006 10:51 am
by VW337
the switched outputs are relayed internally, only the amp remote outs are transistor outs.
Posted: Tue Dec 12, 2006 10:52 am
by Bfowler
gotcha, thanks!
Posted: Tue Dec 12, 2006 10:58 am
by slc72005
bfowler if you remember i asked the same question about led's and trhe fans and i was told its ok to do, and i did and never had a fuse blow
Posted: Tue Dec 12, 2006 4:25 pm
by BH
I'm using mine to power an XM unit and a tube crossover unit and my deck and all sorts of fun stuff and having no troubles what-so-ever.