Page 1 of 1

Right guys - Subwoofer amp suggestion!!!

Posted: Tue Jul 08, 2008 6:32 am
by PassatBloke
I will be running (eventually) 2 x IDMAX 12" Subs Infinite baffle on my rear shelf, I would preferably like to have all phoenix gold gear but cant really find (i.e Im not as au fait as you guys with PG stuff) Something that will do 500-800w RMS x 2 for the Max's - Would prefer it to be older skool of course, so no Ti amps or anything :D

Any suggestions?

Posted: Tue Jul 08, 2008 7:06 am
by fuzzysnuggleduck
What impedance are you going to wire the subs into?

How about a ZPA 0.5? MS2250?

Posted: Tue Jul 08, 2008 8:21 am
by PassatBloke
I can get dual 2's or dual 4's so pretty much any resistance!

Posted: Tue Jul 08, 2008 8:24 am
by Bfowler
you already have m44's...so maybe a m100 @ 2ohms with cooling fans?

Posted: Tue Jul 08, 2008 8:31 am
by PassatBloke
I'll be getting an M100 off Marko for my Ti9 elites, I wouldnt have thought an M100 would have been powerfull enough to run 2 idmax's? - ZPA0.5 is favourate at the minute!

Posted: Tue Jul 08, 2008 8:43 am
by Bfowler
i would bet its running about 600watts @ 2ohms.... i just suggested it as it matched your other amps. you COULD go with a m100 EACH if you have some room to spare and extra $$$ burning a hole in your pocket

although a zpa0.5 would best a single one for sure.

Posted: Tue Jul 08, 2008 8:45 am
by stipud
PassatBloke wrote:I wouldnt have thought an M100 would have been powerfull enough to run 2 idmax's?
Get two then ;)

Posted: Tue Jul 08, 2008 8:50 am
by PassatBloke
Dont know if i could fit 3 x M100's and an M44 in the car :D :D

Posted: Tue Jul 08, 2008 9:59 am
by fuzzysnuggleduck
I have a single M100 running two RSD12D2 in 2ohm stereo and it gets plenty loud... but it sounds like you're really going for more than what a single M100 can provide.

Posted: Tue Jul 08, 2008 10:16 am
by stipud
PassatBloke wrote:Dont know if i could fit 3 x M100's and an M44 in the car :D :D
Run one sub then, geez :lol:

Posted: Tue Jul 08, 2008 10:24 am
by soth
MS2250 or ZPA 0.5

Posted: Wed Jul 09, 2008 8:15 am
by flogger11
ZPA0.5, yummy...