Phoenix Gold Phorum

http://i253.photobucket.com/albums/hh63 ... C03994.jpg, hey guys, as u can see, these 2 ti amps are mounted the opposite side of the sub box; ive added 2 sheets of mdf(.75 thick on each), both dynamated, and both these ti amps are STILL Ratteling when some bass notes hit-any ideas of any good materials, foam etc. to mount behind them to help deaden these ? i will not dynamat the back of the amps themselves, so i thought id ask to see what people are using thanks

its probably within the amp.

i would take off the case and add some butyl dynamat, or sticky foam to the inside of the case, and look for potential culprits of rattle

good idea; yeah its definetly from the amp on the left( ti600.2), when i hear the noise , and then put my hand on it, pressing on the outside case, it goes away-btw i did use some rubber cement on that ti elit 6.5, worked like a charm!!!! heres the pic-btw, how do i cut/paste pics here w/out the photobucket link, ive tried, but not successful yet-thanx Christian
http://i253.photobucket.com/albums/hh63 ... C03993.jpg

thedeal7235 wrote:good idea; yeah its definetly from the amp on the left( ti600.2), when i hear the noise , and then put my hand on it, pressing on the outside case, it goes away-btw i did use some rubber cement on that ti elit 6.5, worked like a charm!!!! heres the pic-btw, how do i cut/paste pics here w/out the photobucket link, ive tried, but not successful yet-thanx Christian
http://i253.photobucket.com/albums/hh63 ... C03993.jpg

Like that, which makes this happen: