Page 1 of 1
Should I try one out?
Posted: Fri Aug 15, 2008 6:07 pm
by ELmx479
RSDC10? I keep reading all this good stuff about them and there pretty cheap on Ebay. I'm running a Fi Audio SSD10 now and it impresses me but hey, why not right? It would be in the same box, right around .5 sealed with a ti600 on it. Facing up in a truck.
Posted: Fri Aug 15, 2008 7:15 pm
by KHPower
Most definitely !
great build quality and I have little bad things. great sub for the money.
Posted: Fri Aug 15, 2008 7:19 pm
by thedeal7235
if ur using one, they arent that expensive on the bay, always good to have a backup dont u think?( meaning the fi 4 backup
, however that looks like a prety beefy sub, would luv 2 hear it, ive heard of that co., but never theyre product- do u know what the xcursion is on it? ie-14mm, or 17mm, the rsdc is 14.3 mm, i think it helps to keep it more efficent, espically for a 10"-Christian
Posted: Sat Aug 16, 2008 3:08 am
by ELmx479
Here are the complete specs on the sub. I couldn't find a spec sheet for the rsdc's. Ya, the Fi is a beast. It really puts out some bass for a single 10 sealed but I would like something to compare to in terms of SQ.
SSD10
DUAL 1 | DUAL 2
Fs: 28.3 Hz | 27.6 Hz
Re: 0.75 Ohms/coil | 1.5 Ohms/coil
Qms: 4.17 | 4.27
Qes: .48 | .44
Qts: .43 | .40
Mms: 166g | 175g
Cms: 0.19mm/N | 0.19mm/N
Sd: 310cm^2 | 310cm^2
Vas: 25.6 l | 25.6 l
Spl: 82.7dB 1W/1m | 82.7dB 1W/1m
Bl: 9.3 N/A | 14.1 N/A
Xmax: 21mm
Rms: 800W
Sealed box: .6-1 cuft
Ported box: .9-1.5 cuft @ 33Hz
Sub OD: 11.000”
Cut ID: 9.250”
Mounting depth: 6.000”
Displacement: 0.12cuft
Product code: 01910
Price: $ 179.00
*shipping is included
Posted: Sat Aug 16, 2008 3:57 am
by KHPower
ELmx479 wrote:Here are the complete specs on the sub. I couldn't find a spec sheet for the rsdc's. Ya, the Fi is a beast. It really puts out some bass for a single 10 sealed but I would like something to compare to in terms of SQ.
SSD10
DUAL 1 | DUAL 2
Fs: 28.3 Hz | 27.6 Hz
Re: 0.75 Ohms/coil | 1.5 Ohms/coil
Qms: 4.17 | 4.27
Qes: .48 | .44
Qts: .43 | .40
Mms: 166g | 175g
Cms: 0.19mm/N | 0.19mm/N
Sd: 310cm^2 | 310cm^2
Vas: 25.6 l | 25.6 l
Spl: 82.7dB 1W/1m | 82.7dB 1W/1m
Bl: 9.3 N/A | 14.1 N/A
Xmax: 21mm
Rms: 800W
Sealed box: .6-1 cuft
Ported box: .9-1.5 cuft @ 33Hz
Sub OD: 11.000”
Cut ID: 9.250”
Mounting depth: 6.000”
Displacement: 0.12cuft
Product code: 01910
Price: $ 179.00
*shipping is included
Those specs are really goof for that 10''
I bet that sub hits some awesome lows.