So here it is. Needs some work. The board is burnt pretty good but appears to be repairable. So does anyone know the values (or the newer versions) of the 4 caps on the input side and the 2 bigger ones on the output side so I can replace them?
My M50 from craigslist *pics*
My M50 from craigslist *pics*
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
- fuzzysnuggleduck
- Soy Milquetoast
- Posts: 4423
- Joined: Wed Dec 06, 2006 1:08 pm
- Location: The best place on earth
- Contact:
I have 0/ZERO screws, save but 1. In the 7th pic down you can see it. I saw on here or ebay screws for sale. I'll be hunting them down now. If not a call to Phils replacement will be in order.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
original ones are 2200uf 105c 16v but you can fitter higher uf ones in a similar size case, the m50 only had 3 caps, if you choose shorter caps you can fit 4 in there.
it's strange how i've only ever seen blown m50's and not m25,m44 and m100
it's strange how i've only ever seen blown m50's and not m25,m44 and m100
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
3 caps!?? Really? There's a spot on the board for four. I just thought that the first one had already been removed.marko wrote:original ones are 2200uf 105c 16v but you can fitter higher uf ones in a similar size case, the m50 only had 3 caps, if you choose shorter caps you can fit 4 in there.
I know they can get more capacitance in the same size now so I was just wondering what the uf was now for the same size. Thanks marko.
How about the bigger two on the output side? If I'm doing the input side, I'm gonna do the output side too.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
yes 3!! think pg made a boo boo there when they thought they could fit 4 on the board then tried to fit the top cover on of course if you use a shorter cap you can fit 4 under the cover comfortably, 5600uf or een 6800uf is pretty common in the same size cap these days. as for rail caps i dunno, i'm still looking for a decent replacement for my m100 ones...smgreen20 wrote:3 caps!?? Really? There's a spot on the board for four. I just thought that the first one had already been removed.marko wrote:original ones are 2200uf 105c 16v but you can fitter higher uf ones in a similar size case, the m50 only had 3 caps, if you choose shorter caps you can fit 4 in there.
I know they can get more capacitance in the same size now so I was just wondering what the uf was now for the same size. Thanks marko.
How about the bigger two on the output side? If I'm doing the input side, I'm gonna do the output side too.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Thanks Marko.
I'm going to our local store tomorrow to see about getting them there caps.
I tested the board where the caps came from. Both contacts where the caps posts terminate to the board all tested good, so that's a plus.
Now just to clean it up. Any idea what will get that black crap off of the cover????
I'm going to our local store tomorrow to see about getting them there caps.
I tested the board where the caps came from. Both contacts where the caps posts terminate to the board all tested good, so that's a plus.
Now just to clean it up. Any idea what will get that black crap off of the cover????
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
-
- Posts: 138
- Joined: Mon Nov 12, 2007 8:49 am
- Location: saskatchewan