PG QX amps: Measurements and photos
Posted: Thu Sep 25, 2008 12:57 pm
question: is this done for the other amps, too?
Anyways: Photos will come shortly.
Let's start with the QX 900.1d.
- length is 422mm. Add on 15mm for the battery terminals and another 7mm for the Cinch. So, the manual is sort of accurate but ignores the terminals. Those measurements allow nothing for sockets or connectors.
- Mass, well packed for transport, is around 6.5kg. I'll try and check, but best estimate is 5.5-5.75kg for the amp alone.
Guts pics:
More will come when I have them uploaded.
This particular example has minor surface rust on one of the end panels (I think it got rather warm in humid conditions; there's some surface rust on the washers inside, too).
Bret
Anyways: Photos will come shortly.
Let's start with the QX 900.1d.
- length is 422mm. Add on 15mm for the battery terminals and another 7mm for the Cinch. So, the manual is sort of accurate but ignores the terminals. Those measurements allow nothing for sockets or connectors.
- Mass, well packed for transport, is around 6.5kg. I'll try and check, but best estimate is 5.5-5.75kg for the amp alone.
Guts pics:
More will come when I have them uploaded.
This particular example has minor surface rust on one of the end panels (I think it got rather warm in humid conditions; there's some surface rust on the washers inside, too).
Bret