Page 1 of 1
Xenon LPL question....
Posted: Mon Oct 20, 2008 9:46 am
by Rold Gold
Is there a way to run 2 600.1's on 1 lpl?????
What I thought was that if you went from the HU to the "master" amp(600.1) and set all the XO levels and then run out of the master to a "slave" amp(600.1 set to pass-thru) and it would use the master settings.... Thus only having to use 1 LPL to control both amps.....
Am I off my rocker??????
Posted: Mon Oct 20, 2008 9:48 am
by Bfowler
nope....thats how you do it dude. good jorb
although i don't know if they have a crossover defeat...but you arent using it for 1 sub with mulitple coils...so you should be fine
Posted: Mon Oct 20, 2008 9:49 am
by thedeal7235
i think you can, look at the pg manuels under car audio- i think , it shows using a single lpl-44 for a ti or muitple amps, but believe it would work for any pg amp that accepts lpl-44; as a matter of fact when i used two rsd 1200.1, i used the tech diagram for the ti amps using one lpl-44 to control multiple amps, and IT DID WORK!
Posted: Mon Oct 20, 2008 10:05 am
by Rold Gold
It's Nick's 4-15" solo rounds in the FOCUS hatch......2-600.1's and a 200.4...
We couldn't get it to work......
Posted: Mon Oct 20, 2008 10:07 am
by stipud
You can use a phone cable splitter as well.
Posted: Mon Oct 20, 2008 10:13 am
by Rold Gold
I was gonna ask about that too....... I thought I'd read about that but.....
.........
Posted: Mon Oct 20, 2008 10:17 am
by stipud
Here it is:
http://download.phoenixphorum.com/TechS ... litter.pdf
For ZX amps you had to use two conductor wires and a cable between the - terminals. For all others you can use 4 conductor and no need for the extra wire.
Posted: Mon Oct 20, 2008 9:59 pm
by Rold Gold
Works!!!!! It looks like SHIT but fuk is it loud!!!!!!
Posted: Mon Oct 20, 2008 10:43 pm
by oldskoolmseriesfan
just going 2 say it looks so loud i can hear the fkn pic!! what kinda ride is it in?
Posted: Tue Oct 21, 2008 3:28 am
by gkitching
Ratty SPL vehicles. Gotta lovem
Gotta love the oldschool solo's too!
Posted: Tue Oct 21, 2008 5:31 am
by Rold Gold
2001 Focus........
He just couldn't help himself after the sale......Plus he'd just gotten the focus back on the road.... His fronts are pretty bright off that 200.4 I might add..... I planted the seed to get 2 more 600.1's......
Posted: Tue Oct 21, 2008 11:03 am
by dedlyjedly
I would recommend that you use the phone-splitter method for what you're trying to accomplish. I've never had good luck using the rca pass-thru to accomplish this because of differences in the preout voltage levels of your source and the amp's output. You can compensate with gain, but why would you?
I do plan on using the pass-thru on some of my Ti amps to not only provide a low pass filter for my MS but to also pass-thru an LPL signal. I'm actually pretty excited about that prospect.
Posted: Wed Oct 22, 2008 10:38 am
by denim
I will always regret selling my round solo 15. 