Page 1 of 1
Trade xenon 100.4 for tantrum 600.4 or not
Posted: Tue Mar 13, 2007 7:22 pm
by R_916
Anybody think i should trade my xenon 100.4 for an tantrum 600.4 so it could match my tantrum 1200 or is there an sound quality difference. Please let me know thanks.
Posted: Tue Mar 13, 2007 7:31 pm
by AVICJR
You gain a little more headroom plus matching amps. But the Xenon line is no slouch either. It's all about personal pref.
Posted: Tue Mar 13, 2007 7:43 pm
by VW337
The Tantrum line is a force to be reckoned with but it is not as clean of power as the Xenons. You would not likely hear a difference however, you would only see it on a scope.
Posted: Wed Mar 14, 2007 8:00 am
by Bfowler
it sounds like its just for front duty, since you already have a 1200.1. the xenon is a better amp for full range speakers because it is optimized for a 4ohm stereo load.
Posted: Wed Mar 14, 2007 11:03 am
by bdubs767
keep the xenon

Posted: Wed Mar 14, 2007 11:19 am
by AVICJR
bdubs767 wrote:keep the xenon

And trade for a Xenon 1200.1.
J/K You're set with what you have now.
Posted: Wed Mar 14, 2007 11:23 am
by stipud
I would take the Tantrum 600.4, or trade the Tantrum 1200.1 for a Xenon 1200.1.
Matching installs are the shit. It is very rare that one with different amps will look good.
Posted: Wed Mar 14, 2007 11:32 am
by bdubs767
im drunk....read post wrong
I wouldnt do a straight up trade, ask for a few bucks w/ it as the xenon is a better amp. But in the end I would trade to have matching amps.
Posted: Wed Mar 14, 2007 11:32 am
by bdubs767
AVICJR wrote:bdubs767 wrote:keep the xenon

And trade for a Xenon 1200.1.
J/K You're set with what you have now.
NEVER
t1200.1>x1200.1
Posted: Wed Mar 14, 2007 11:34 am
by AVICJR
bdubs767 wrote:AVICJR wrote:bdubs767 wrote:keep the xenon

And trade for a Xenon 1200.1.
J/K You're set with what you have now.
NEVER
t1200.1>x1200.1
thought was to have matching amps also.
Posted: Wed Mar 14, 2007 12:03 pm
by Bfowler
t1200.1 IS > x1200.1
but
x100.4 + x1200.1 > t600.4 + t1200.1
Posted: Wed Mar 14, 2007 12:54 pm
by bdubs767
Bfowler wrote:t1200.1 IS > x1200.1
but
x100.4 + x1200.1 > t600.4 + t1200.1
depends on your outboard processing

IMO
but in all honesty fowler is right.