Benched her right up and took pictures of inside...
HEY JOERG.. what say you - i dont think this one needs cleaning....
got lucky, eh?!?!
Posted: Wed Mar 18, 2009 8:43 pm
by joerg
Does´nt look like that it needs to get cleaned at all! Lucky you Matt
But we´re missing some serious rotation in your vid!
Posted: Wed Mar 18, 2009 8:47 pm
by mhyde71
what do you mean rotation???
Posted: Wed Mar 18, 2009 8:48 pm
by mhyde71
do you mean the magnet and the seems on the round cylinder not being lined up together??
Posted: Wed Mar 18, 2009 8:49 pm
by joerg
I mean that u just tickled the clone during you bench test!
Posted: Wed Mar 18, 2009 8:51 pm
by mhyde71
actually i managed to get into a white pale/bucket and turned it up... wholly shit... it blew my mind!!! I should have video recorded it... maybe tomorrow... we'll see... I need to now make a box for it.
Posted: Wed Mar 18, 2009 8:53 pm
by mhyde71
BUT you do see what I am talking about eh?? see where the seem in the magnets are not in lilne with the stator (i think that's what I am looking at in the pictures above)... looks like the seems for the magnets are maybe off by a half of turn, or should they be that way... that was the way it was just upon opening it... I didnt change anything... what say you
Posted: Wed Mar 18, 2009 9:07 pm
by joerg
Those are meant to be that way Matt! They should not line up at all! otherwise u would have no chance to get any rotation out of it! If the seems line up u already reached the 38 degree rotation maximum
Posted: Wed Mar 18, 2009 9:09 pm
by mhyde71
ah ha I see... nice...
yeah it looked /looks real clean in there... nice
m
Posted: Thu Mar 19, 2009 6:34 am
by ttocs
I will never forget the fist system we did with a cyclone. My buddy fired it up and I had my old 12v cordless drill on top of the rear package tray. I will never forget watching that drill rattle like all hell for 3 secs before it was launched into the back seat where I caught it.
Your gonna love that thing
Posted: Thu Mar 19, 2009 6:39 am
by joerg
I can´t wait to fire up 4 of them at the same time in my car!
Posted: Thu Mar 19, 2009 6:52 am
by mhyde71
QUESTION:
can the cyclones be installed like a reg sub...i.e. motor/basket out and firing down??? and if so, and if i understand correctly from manual, that the volume reccomended is 2/2.5 depending on your taste in music- so if i wanted to do a firing down - can I- OR alternative is to make a box to mfg. specs and make a couple of the walls with plexi so the shock and awe of the cyclone can be seen....right?
maybe it is neat/nice to have installed like a regular sub, but i would want to be able to show off the paddle action(s)....
Is it a strict specification for the 2.5/3cf volume for the cyclone?? or can it be a little smaller... I am thinking now how the F am i going to install this unit and where...
i have looked at all sorts braces/brackets, swival hinges etc... and thought about a way to suspend from the roof of car, but I also need another amp for it... right???
LAST QUESTION...
with only one bass cube, do I run HU to BC, and then from BC get a couple y-adapters from the rca out and run one set to the reg sub and sub amp, and the another set to the cyclone and cyclone amp...?
I am considering a 2125 for cyclone duties-so I would want to make a box that will not only house the clone, but the amp as well seeing how my other gear is pretty well fixed locations. - there really is no moving about the amps and sub i have in there now so I gotta work with what i got.
pls thx
Posted: Thu Mar 19, 2009 7:03 am
by joerg
I´ll have the motor inside out too Matt! Wanna do a real sshowoff as well!
You can make an enclosure of 2,5cuf then! Wouldn´t make a smaller one as you are going to get more mechanical noise out of the clone.
HU-BC-left channel for MS2250 for reg subs
--------rigth channel MS2125 for Cyclone
Posted: Fri Apr 03, 2009 1:41 am
by attack eagle
very nice... And doesn't even need cleaning. You, sir, are a lucky dog.
Posted: Sat Apr 11, 2009 12:29 am
by bogart
very nice...currently building a box for two cyclones firing out in just under two ft per driver to run off the back channels of a reactor on a four ohm bridge...still got a way to go but she'll look like a big as generator with a reactor on the back of it and the cyclones up top. am burying a g series dd9500 and a monster autotek in it to but from the back she'll be all pg...tubes and cable all over...ought to turn out cool....they are an interesting speaker...
once the box is done I'll but it on a sine wave generator and see just how low she'll go...
heres a couple pics so you can see how they'll run up top sticking up over the back seat
