????Rockford Fosgate????
- mistawikid
- Posts: 85
- Joined: Sun Oct 25, 2009 2:59 pm
????Rockford Fosgate????
In my hometown we have a small custom install shop who sells all kinds of different equipment - except PG? - (I've told him a million times to get it) I hang out and shoot the breeze on occasion and see whats new from Autotek, Kicker, JL.... all the "popular" stuff. Yesterday he showed me the new line from Rockford and I must say I was impressed, ALOT! They got three distinct lines with appropriate names and unique styles. They offer custom one off paint jobs on the POWER line. Seems like they are getting back to the old school guts, like when a punch 225 could punch the shit out of three or four subs and it was the small amp! If your bored, check out the new stuff, www.rockfordfosgate.com
Come on PG make something HOT that has the competition running for cover!
Come on PG make something HOT that has the competition running for cover!
! its all fun and games until the Cops show up !
- mhyde71
- Dr. Jekyll
- Posts: 6231
- Joined: Sun Jan 20, 2008 8:34 pm
- Location: PG FanBoy in Green Mtn Vermont
- Contact:
now i havent had time to look through their site...BUT i am guessing that is airbrush work...simliar to what Exil3 did>>or does..?
neighbor upstairs does airbrushing...only has hobby kit right now... but we've been talking and stuff... he's not ready to jump in full speed...BUT would like to figure a way of maybe adding airbrushing into the PC'ing some how...
NOW QUESTION for someone that may know...
Airbrushing? In theory... could we not make up a template out of thin aluminum plate or something and have the artwork cut into it for a one time set up job piece, and use that as a template for airbrushing the artwork onto these newly coated amp cover and end plates??? would that be a possibility?
Anyone familiar with airbrushing and stuff and how or what would be best way to make templates up>?
i am finding that the silk-screening for each and every possible amp out there is just not going to fly---i would either need some kind of template for the airbrushing idea or decals out of that hi-temp vinyl and do it that way- but even with that decal idea I am running into hurdles.
What say you guys?! airbrushing perhaps? with a template on top of the end plate(s)?!??!
does anyone know of good name for good starter airbrush kit?
neighbor upstairs does airbrushing...only has hobby kit right now... but we've been talking and stuff... he's not ready to jump in full speed...BUT would like to figure a way of maybe adding airbrushing into the PC'ing some how...
NOW QUESTION for someone that may know...
Airbrushing? In theory... could we not make up a template out of thin aluminum plate or something and have the artwork cut into it for a one time set up job piece, and use that as a template for airbrushing the artwork onto these newly coated amp cover and end plates??? would that be a possibility?
Anyone familiar with airbrushing and stuff and how or what would be best way to make templates up>?
i am finding that the silk-screening for each and every possible amp out there is just not going to fly---i would either need some kind of template for the airbrushing idea or decals out of that hi-temp vinyl and do it that way- but even with that decal idea I am running into hurdles.
What say you guys?! airbrushing perhaps? with a template on top of the end plate(s)?!??!
does anyone know of good name for good starter airbrush kit?
Last edited by mhyde71 on Wed Feb 17, 2010 8:26 am, edited 1 time in total.
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
https://www.facebook.com/KhameleonKoatings/photos_albums
-
- Posts: 897
- Joined: Wed Nov 25, 2009 11:08 am
- Location: Burb of Detroit
Preach on. Heat sinks that look like heat sinks. Those were my favorites too. Not to mention no surface mount technology! Super easy for us lay persons to repair. Amps that can last forever!Misfire wrote:I think its just me, but I just don't care for the sinks.... Guess I really haven't since the Punch 30, 45, and 150. The power 300 and 1000 where cool too. Guess I am just showing my age.
I likes the old RF PUNCH a2 amps.......
Kicker's ZR line is another badass.......
Kicker's ZR line is another badass.......
Those tender little burgers with them little, itty-bitty grilled onions that just explode in ya mouth like flavor crystals every time you bite into one.. just makes me want to burn this muthafuka down.... Come on, Pookie, let's burn this muthafuka down!!!
The new RF amps are not all that impressive. They have way less power then their last generation did. A 75W x 2 amp from a few years ago was really about 200W x 2. Now, yes I know it was so big it did not fit anywhere either.
The new amps barely make rated power, and that equates to very low value.
I do like their tiny size though.
The new amps barely make rated power, and that equates to very low value.
I do like their tiny size though.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
-
- Posts: 16
- Joined: Thu Jan 13, 2011 11:46 pm
Re: ????Rockford Fosgate????
I've always been a Rockford fan. I still think my old punch 200 was the strongest amp i've ever owned (back in 1997).
Here's what i've got in my Legend right now. Couldn't be happier!
Haven't tried any of they're new stuff though.
![Image](http://i61.photobucket.com/albums/h43/DevanTheDude/DSC00336.jpg)
Here's what i've got in my Legend right now. Couldn't be happier!
Haven't tried any of they're new stuff though.
![Image](http://i61.photobucket.com/albums/h43/DevanTheDude/DSC00336.jpg)
- brenzbmr@sb
- Booty Connoisseur
- Posts: 1606
- Joined: Wed Dec 06, 2006 9:49 pm
- Location: as ziggy marley said" on a beach in hawaii"
Re: ????Rockford Fosgate????
hey eric
u actually ought if u can demo the new stuff
its actually really different then that crap they put out 8 or nine years ago. i really like the brt amp.
if they made a brt 500 and made them strappable and put out 1200 watts at 2 ohms and draw like 12 amps of current then i would run 8 of them
to two dual 2 ohm voice coils 18s and only pull 100 amps of current. now thats possiblities!!!!
u actually ought if u can demo the new stuff
its actually really different then that crap they put out 8 or nine years ago. i really like the brt amp.
if they made a brt 500 and made them strappable and put out 1200 watts at 2 ohms and draw like 12 amps of current then i would run 8 of them
to two dual 2 ohm voice coils 18s and only pull 100 amps of current. now thats possiblities!!!!
You may have subs in your car........but my doors sound better!
-
- Posts: 1220
- Joined: Mon Dec 25, 2006 4:49 am
- Location: Louisiana
Re: ????Rockford Fosgate????
I have a new pbr300x4 micro amp I am selling if it ever arrives.
Cheap too
Cheap too
99 Volvo S70 T5 Turbo
-
- Posts: 3
- Joined: Sat Jul 09, 2011 2:59 am
Re: ????Rockford Fosgate????
i bought my current ride with 3 couple year old fosgate amps and i cant get them out fast enough. i wasnt a fan of the chronic overheating original punch line and im still not a fan of thier new(er) stuff either. i still find them very un-refined and just not good sounding amps. just my 2 bits
-
- Posts: 1
- Joined: Fri Jul 29, 2011 7:04 am
Re:
You forgot the power 600, maybe I'm as old as you are.Misfire wrote:I think its just me, but I just don't care for the sinks.... Guess I really haven't since the Punch 30, 45, and 150. The power 300 and 1000 where cool too. Guess I am just showing my age.
![Wink :wink:](./images/smilies/icon_wink.gif)
Re: ????Rockford Fosgate????
Some of the finest amplifiers I've ever had the pleasure of owning. So good I kept them all, 20 years going strong. Punch 120a2, Power 500a2, Power 800a4, Power 800a4C, and the beast a Power 1100a2. LOVE old school RF.
https://www.youtube.com/watch?v=Pz3XcDE8uKg
https://www.youtube.com/watch?v=Pz3XcDE8uKg
Re: ????Rockford Fosgate????
I don't know anyone that would argue that they are not solid amps that put out some power. And I know some people that would argue some stupid shit.
what else can I say I am a grumpy asshole most of the time.