Ti12" and R10" woofers VS 110 volts AKA the wall socket:D

Reviews for car audio, or general products.
Post Reply
xmarbelx
Posts: 5
Joined: Wed Jun 01, 2011 9:59 pm

Ti12" and R10" woofers VS 110 volts AKA the wall socket:D

Post by xmarbelx »

check out how i smoked these lovely woofers!!
PG Ti12" and PG R10" VS 110volts AKA the WALL SOCKET:D
a 200 rms sub and a 600 rms sub Tortured to death!


VIDEO MADE IN THE PHILIPPINES
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by dvnt88 »

xmarbelx wrote:check out how i smoked these lovely woofers!!
PG Ti12" and PG R10" VS 110volts AKA the WALL SOCKET:D
a 200 rms sub and a 600 rms sub Tortured to death!


VIDEO MADE IN THE PHILIPPINES
Really :shock: ...You've got nothin' better to do than destroy 2 perfectly good subs :doh: , If I had money to throw out the window it sure as hell wouldn't be doin' somethin' as stupid as this :doh: ...no matter what the reason. :naughty:
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14783
Joined: Fri Dec 19, 2008 9:53 pm

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by ttocs »

we called it the 60 hz test ourselfs...

An x-max will actually hold up for a while.
what else can I say I am a grumpy asshole most of the time.
User avatar
holmis
Posts: 754
Joined: Thu Jul 08, 2010 6:11 am
Location: Lillehammer, Norway
Contact:

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by holmis »

Back in the 90`s when the first strokers came out , we did 4 15" at 220V for 3 minutes.... that was COOL !

:mrgreen:
Old School PG Fan/Collector & Jeep fanatic...
Madman in a nuclear mode!!
2x FAS, 3xReactor, MS275, MS2125, M25, M44, 2xMPS2240, ZX450, 3xZX350, 2xZX250, 8xPG Original Jacket, Box full of BassQube`s Xmax8,10,12, 2 sets of BostonAcoustics 6.5.3 + + +

My Buyer & Seller Ratings : http://phoenixphorum.com/viewtopic.php?f=7&t=15269
My CV Recone service: www.cerwinvega.multi2net.com
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by stipud »

They would probably last even longer if the pole vents weren't blocked :D
xmarbelx
Posts: 5
Joined: Wed Jun 01, 2011 9:59 pm

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by xmarbelx »

dvnt88 wrote:
xmarbelx wrote:check out how i smoked these lovely woofers!!
PG Ti12" and PG R10" VS 110volts AKA the WALL SOCKET:D
a 200 rms sub and a 600 rms sub Tortured to death!


VIDEO MADE IN THE PHILIPPINES
Really :shock: ...You've got nothin' better to do than destroy 2 perfectly good subs :doh: , If I had money to throw out the window it sure as hell wouldn't be doin' somethin' as stupid as this :doh: ...no matter what the reason. :naughty:
hey man.. thanks for the comment.. well i just happen to have just a lil bit too much money... and saw those 2 beautiful PG woofers... i checked the net for some videos of it being tortured but did not find any.. thats why i decided to make this video :D

feel free to tell your friends about some stupid dude in the philippines breaking some woofers.. :D
i will have som more videos soon :D

thanks!
ttocs wrote:we called it the 60 hz test ourselfs...

An x-max will actually hold up for a while.
60 hz test FTW!!
holmis wrote:Back in the 90`s when the first strokers came out , we did 4 15" at 220V for 3 minutes.... that was COOL !

:mrgreen:
415 + 220volts sounds like FUN! hehehe

stipud wrote:They would probably last even longer if the pole vents weren't blocked :D
opps... ill make sure not to block any on my next video :D

thanks for the views guys!!!
todd217
Posts: 1127
Joined: Fri Apr 10, 2009 2:36 pm
Location: rantoul illinois

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by todd217 »

Thx for the video makes me want to try a ti12@2ohms mono on the ms1000ta.
xmarbelx
Posts: 5
Joined: Wed Jun 01, 2011 9:59 pm

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by xmarbelx »

todd217 it can easily handle a thousand :D i was really surprised with the Ti woofer!! i thought it was just gonna last for like 10 seconds only..
User avatar
dvnt88
Posts: 2330
Joined: Sun Apr 25, 2010 10:13 am
Location: Portland, Oregon

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by dvnt88 »

xmarbelx wrote:
dvnt88 wrote:
xmarbelx wrote:check out how i smoked these lovely woofers!!
PG Ti12" and PG R10" VS 110volts AKA the WALL SOCKET:D
a 200 rms sub and a 600 rms sub Tortured to death!


VIDEO MADE IN THE PHILIPPINES
Really :shock: ...You've got nothin' better to do than destroy 2 perfectly good subs :doh: , If I had money to throw out the window it sure as hell wouldn't be doin' somethin' as stupid as this :doh: ...no matter what the reason. :naughty:
hey man.. thanks for the comment.. well i just happen to have just a lil bit too much money... and saw those 2 beautiful PG woofers... i checked the net for some videos of it being tortured but did not find any.. thats why i decided to make this video :D

feel free to tell your friends about some stupid dude in the philippines breaking some woofers.. :D
i will have som more videos soon :D

thanks!
ttocs wrote:we called it the 60 hz test ourselfs...

An x-max will actually hold up for a while.
60 hz test FTW!!
holmis wrote:Back in the 90`s when the first strokers came out , we did 4 15" at 220V for 3 minutes.... that was COOL !

:mrgreen:
415 + 220volts sounds like FUN! hehehe

stipud wrote:They would probably last even longer if the pole vents weren't blocked :D
opps... ill make sure not to block any on my next video :D

thanks for the views guys!!!
Get a life :bong: ..but if that's what get ur rocks off :doh: , more power too ya. :mrgreen:
Audison Bit Ten
Hertz HSK163's (x2)
Hertz HX250 subs (x2)
Hertz HDP1
Hertz HDP4
PG Tantrum BassCUBE
XS Power D4900
Misc. PG Install Goodies


"Old-Skool TI-Whore"
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14783
Joined: Fri Dec 19, 2008 9:53 pm

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by ttocs »

no reason to be rude about it. Seen alot of people that enjoyed blowing equipment and never understood it but.................
what else can I say I am a grumpy asshole most of the time.
xmarbelx
Posts: 5
Joined: Wed Jun 01, 2011 9:59 pm

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by xmarbelx »

dvnt88 -- alright bro! hope you like the video! ;)

ttocs-- this was my first time to blow up the woofer... it was FUN!
lukeman269
Posts: 442
Joined: Sat Sep 11, 2010 5:18 am
Location: Minnesota

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by lukeman269 »

The Ti12's are the same as the rsdc 12's correct? Looks like a different cone is the only variation.
User avatar
MW3
Morgan @ PG
Posts: 634
Joined: Tue Feb 27, 2007 8:51 am

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by MW3 »

Ti12d and RSDc are different.

For starters, cone, surround, spiders are much different. Ti12d is biased heavily towards vented boxes.

The new Ti2 12inch is a much more balanced woofer between sealed and vented boxes, think of it as higher performance RSDc. As it shares a more similar motor.

All are serious woofers, just depends on the application.
Morgan West
Phoenix Gold Product Manager
lukeman269
Posts: 442
Joined: Sat Sep 11, 2010 5:18 am
Location: Minnesota

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by lukeman269 »

MW3 wrote:Ti12d and RSDc are different.

For starters, cone, surround, spiders are much different. Ti12d is biased heavily towards vented boxes.

The new Ti2 12inch is a much more balanced woofer between sealed and vented boxes, think of it as higher performance RSDc. As it shares a more similar motor.

All are serious woofers, just depends on the application.
Ahh I see. Thank you for clearing that up for me.
User avatar
smgreen20
Posts: 2873
Joined: Wed Dec 20, 2006 11:23 am
Location: Somewhere in Between

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by smgreen20 »

While I've seen this done to countless subs, I have mixed feelings about this video. it's as if you did it to be a douche, but at the same time you made it look like you're showing off the subs in a positive manner.

IDK???????? :scratch: :scratch: :scratch: :scratch: :scratch:
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."

Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
User avatar
thefowlerfam
Posts: 6
Joined: Fri Sep 30, 2011 3:04 pm

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by thefowlerfam »

[/quote] hey man.. thanks for the comment.. well i just happen to have just a lil bit too much money... and saw those 2 beautiful PG woofers... i checked the net for some videos of it being tortured but did not find any.. thats why i decided to make this [/quote]

Well if you have a little too much $$, you can throw a little my way. I'm in need of a new enclosure for my Ti12d's...just like the one in your video. :lol: You can pm me :mrgreen:
User avatar
ZTwenty8SSR
Posts: 467
Joined: Sun Oct 04, 2009 7:06 am
Location: Cornwall Ontario

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by ZTwenty8SSR »

If you like destruction send me 4 of those 12" and I'll take a 1957 case 600 propane and a oliver 990 Detroit diesel tractor and have a tug of war with them tied to my hyundai see who gets the bigger piece lol
User avatar
ZTwenty8SSR
Posts: 467
Joined: Sun Oct 04, 2009 7:06 am
Location: Cornwall Ontario

Re: Ti12" and R10" woofers VS 110 volts AKA the wall socket:

Post by ZTwenty8SSR »

Just joking I need my hyundai to drive to work
Post Reply