doing these for a bmw e30
started life as a flat plastic panel
i attached the tweeter cup with some hot glue and a single screw.
a little sail panel write up
- Bfowler
- Briaans..... BRIAAAAANNNNNNS
- Posts: 10764
- Joined: Wed Dec 06, 2006 11:06 am
- Location: So easy, a cavewomen could do him
a little sail panel write up
- Attachments
-
- IMG00077.jpg (115.27 KiB) Viewed 12392 times
-
- IMG00076.jpg (116.63 KiB) Viewed 12392 times
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
i've had tougher choices at a soda machine...
- Bfowler
- Briaans..... BRIAAAAANNNNNNS
- Posts: 10764
- Joined: Wed Dec 06, 2006 11:06 am
- Location: So easy, a cavewomen could do him
next i stretched tshirt fabric over the whole thing and hot glued it in the back
after that was secure i painted over the whole thing with resin and dabbed on some fiberglass mat for strength. when they were dry, i cut away the excess and lightly sanded them
after that was secure i painted over the whole thing with resin and dabbed on some fiberglass mat for strength. when they were dry, i cut away the excess and lightly sanded them
- Attachments
-
- IMG00082.jpg (88.23 KiB) Viewed 12390 times
-
- IMG00081.jpg (91.55 KiB) Viewed 12390 times
-
- IMG00080.jpg (112.22 KiB) Viewed 12390 times
-
- IMG00079.jpg (112.54 KiB) Viewed 12390 times
-
- IMG00078.jpg (106.84 KiB) Viewed 12390 times
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
i've had tougher choices at a soda machine...
- Bfowler
- Briaans..... BRIAAAAANNNNNNS
- Posts: 10764
- Joined: Wed Dec 06, 2006 11:06 am
- Location: So easy, a cavewomen could do him
next i filled the imperfections and sanded smooth. this takes a couple times.
lucky since they are small this goes fast. they are now ready to be covered. i'm going to use paint...but i'm not doing that today...i'm going make sure the filler is completely cured
lucky since they are small this goes fast. they are now ready to be covered. i'm going to use paint...but i'm not doing that today...i'm going make sure the filler is completely cured
- Attachments
-
- IMG00087.jpg (101.66 KiB) Viewed 12385 times
-
- IMG00086.jpg (128 KiB) Viewed 12385 times
-
- IMG00085.jpg (109.13 KiB) Viewed 12385 times
-
- IMG00084.jpg (114.32 KiB) Viewed 12385 times
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
i've had tougher choices at a soda machine...