Sneak Peek

Post by **stipud** » Sat Dec 26, 2009 2:33 pm

I like it! And I am glad to see clip lights coming back!

bruther · Post by **bruther** » Sat Dec 26, 2009 7:18 pm

I think it looks great...the only thing I would change is to have the speaker terminals at the opposite side of the power/ground terminals....so it looks more balanced. Otherwise, sign me up for a couple.

MW3 · Post by **MW3** » Sat Dec 26, 2009 8:08 pm

Guys,

For Ti series we wanted a clean, understated design that is a blend of original M/Ti series but with 2010 look.

We will get some better pictures up shortly that do a it a little better justice.

todd217 · Post by **todd217** » Sat Dec 26, 2009 8:54 pm

MW3 wrote:Guys,

For Ti series we wanted a clean, understated design that is a blend of original M/Ti series but with 2010 look.

We will get some better pictures up shortly that do a it a little better justice.

i can understand that but the m/zx/ti were all had pretty much unique cosmetics. after you saw one you knew what you were looking at from that day. i guess what im trying to say is if you covered up the leds with a piece of tape would you know its a PG after seeing it one time.

MW3 · Post by **MW3** » Sat Dec 26, 2009 9:40 pm

todd217 wrote:
MW3 wrote:Guys,

For Ti series we wanted a clean, understated design that is a blend of original M/Ti series but with 2010 look.

We will get some better pictures up shortly that do a it a little better justice.
i can understand that but the m/zx/ti were all had pretty much unique cosmetics. after you saw one you knew what you were looking at from that day. i guess what im trying to say is if you covered up the leds with a piece of tape would you know its a PG after seeing it one time.

I hear what you are saying but that knifes cuts both ways. Some people can't stand the unique look of Tantrum, RSD or Xenon. I was involved in those projects (among others), so I have plenty of experience with feedback on cosmetics, good and bad.

Cosmetics are subjective but important. One guy's clean is another guy's boring. Case in point the MS series, some love the old battle axe look while others think its a boring boat anchor. But there is no dispute the amplifiers perform, that is what we are focused on.

For the Ti series, we wanted a clean look that focuses on the electrical package. The more expensive cosmetic parts we hang off the amp, the less money we can spend on electrical at the same price point.

MW3 · Post by **MW3** » Sat Dec 26, 2009 10:00 pm

vladthebad wrote:Replace the curve on the front edge with an angle...... and it could have matched fairly nicely with the old Ti series with just a different anodizing option....

Whats the circuit board on that bad boy look like?

Any chance we can see it sitting next to a Ti500.4 or a Ti800.1 or a Ti1000.2 or something for size comparison?

Ti1500.1/Ti600.4 is almost same size as original Ti500.4/Ti600.2.

Ti2500.1/Ti800.4 adds a few inches.

I will post up exact sizes in a bit.

Post by **stipud** » Sun Dec 27, 2009 7:56 am

Damn this amp sounds like it has pretty much everything I could have asked for, and then some. Thank you Morgan and AAMP! I haven't been this excited about car audio in years. Now if the components and sub are even half as good I will definitely consider changing out my install!

One important question for me would be how do they perform mounted upside down? Where is all the heatsink mass located?

NewOldStock · Post by **NewOldStock** » Sun Dec 27, 2009 12:42 pm

MW3 wrote:Guys,

For Ti series we wanted a clean, understated design that is a blend of original M/Ti series but with 2010 look.

We will get some better pictures up shortly that do a it a little better justice.

Absolutely! old Linear power amps were "understated/boring" to look at just like old MS series amps... "understated/boring", but I would run them right now because they were so good.

heck, look at Lunar amps... they look like hell (IMO) but they are widely regraded as high quality, high SQ amps... I am betting they arent purchased because of their looks, but because of how they perform.

PG needs understated and over-performing amps (well, everything really) to take back their place in the car audio world.

my question is, are you going to do custom colors for customers? I can see replacing the amps in my wife's car with a single 4-channel - if I can get it color matched that would seal the deal for her.

gridracer · Post by **gridracer** » Sun Dec 27, 2009 5:33 pm

I am seriously interested in what I see so far can't wait to see something in person.

Post by **kg1961** » Sun Dec 27, 2009 5:36 pm

gridracer wrote:I am seriously interested in what I see so far can't wait to see something in person.

x2 cash in hand let hope they are GGGGREAT

GX3 · Post by **GX3** » Sun Dec 27, 2009 7:18 pm

Dare I ask the MSRP on "The One" and how can i buy one if there isn't a dealer in my State

Post by **kg1961** » Thu Dec 31, 2009 12:19 pm

any new pics for the new year Morgan???????????

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Thu Dec 31, 2009 12:53 pm

GX3 wrote:Dare I ask the MSRP on "The One" and how can i buy one if there isn't a dealer in my State

If you don't have a dealer in your whole state......MOVE!!

Post by **kg1961** » Thu Dec 31, 2009 1:43 pm

old school do you?
i don't think anyone in alberta sells pg?

Post by **fuzzysnuggleduck** » Thu Dec 31, 2009 2:47 pm

AAMP has a whole network of dealers that they are going to leverage to sell PG products. By my best guess, PG will be available in a lot more brick and mortar stores with AAMP than under Rodin.

Post by **joerg** » Fri Jan 01, 2010 4:42 am

fuzzysnuggleduck wrote:AAMP has a whole network of dealers that they are going to leverage to sell PG products. By my best guess, PG will be available in a lot more brick and mortar stores with AAMP than under Rodin.

I think this shouldn´t be a problem as long as they keep the high level line out of those stores. Focal did the very same thing here in europe and it didn´t hurt them!

MW3 · Post by **MW3** » Fri Jan 01, 2010 9:25 am

Happy new year guys...

I will post up some goodies tomorrow.

MW3 · Post by **MW3** » Sat Jan 02, 2010 9:00 am

Attached is a pic of the entry line 10" woofer.

audiophyle_247 · Post by **audiophyle_247** » Sat Jan 02, 2010 9:16 am

Thats a good looking sub.
Can we get some specs for it?

Irongoats · Post by **Irongoats** » Sat Jan 02, 2010 11:22 am

Sun looks good for an entry level.

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Sat Jan 02, 2010 11:39 am

kg1961 wrote:old school do you?
i don't think anyone in alberta sells pg?

There is a shop about 45 mins from me in Langley, that I know for sure sells PG. The shop in town here is run by a guy I used to compete against, Im sure I can persuade him once all the new gear is unveiled laater this month at CES, to sell PG, he sells Hertz, Audison, JL Audio, and some lower end stuff. I was just in there on Boxing day and hes not happy with JL's high prices,so.........

Im not sure about any shops in Van I haven't checked the city out in awhile, Ryan and Tom might know as they live out there.

SLICK · Post by **SLICK** » Sat Jan 02, 2010 12:15 pm

audiophyle_247 wrote:Thats a good looking sub.
Can we get some specs for it?

X 2

Dirtyred · Post by **Dirtyred** » Sat Jan 02, 2010 1:38 pm

good looking sub. gimme more please.

Post by **kg1961** » Sat Jan 02, 2010 2:16 pm

MORGAN very nice teasser
all of us need to see the top of the line items
im sure 99% of us all want to see the ti items as that is were we will spend our money....

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Sat Jan 02, 2010 8:28 pm

that is a very skookum driver to be just an entry level. Im stoked!!!!!!!

Sneak Peek

nnn

item

item

Re: item

item