rc addicts
rc addicts
I was suprised to see the setup that a couple of you had in the other posts. I have just got back into rc cars with a slash 4x4 and slowly investing more into it as time goes on. That is my only one at the moment but I would love to hear what everyone has?
I recently decided to get out of the rc airplane/heli area as the new place I moved to doesn't have much good weather and the field is too far away. I have 2 DX6i radios and some spektrum recievers that I am going to sell if anyone can use them.
I recently decided to get out of the rc airplane/heli area as the new place I moved to doesn't have much good weather and the field is too far away. I have 2 DX6i radios and some spektrum recievers that I am going to sell if anyone can use them.
As you know I have a Traxxas Slash 2wd. Other than replacing the burnt out motor with a Checkpoint Money (brushed 19T), I haven't done anything to it. It's pretty much perfectly balanced just the way it is.
The only issue is that I am getting really tired of my NiCD/NiMH batteries going weak after a month of use. I would love to switch to LiPo but my ESC and charger don't support it, and I really don't feel like pouring money into it to make it work.
The only issue is that I am getting really tired of my NiCD/NiMH batteries going weak after a month of use. I would love to switch to LiPo but my ESC and charger don't support it, and I really don't feel like pouring money into it to make it work.
I was using lipo when I was flying rc so it was easy to switch over. I had a nitro rustler over 10 yrs ago but it is nothing like my slash on 3s lipo. The prices of the lipos that I order has gone down in the last few years. I spent $70 each on the 2s 40c that I use for races but the 3s 30c was only $30 each. I have only dared put the high speed gear in it one time as it had to be close to 60 and you need a big parking lot to keep it under control at that speed.
I have started painting rc bodies for fun and now have the airbrush and vinyl cutter for it. If you want a body done let me know as I am doing them for free for practice in hopes of getting something started later.
I have started painting rc bodies for fun and now have the airbrush and vinyl cutter for it. If you want a body done let me know as I am doing them for free for practice in hopes of getting something started later.
Right now I do have a FG Marder 1/5 for normal (ab)use. Not my car on pic, but it is the same type...
All monstertrucks are sold (Traxxas T-Max, Kyosho Madforce, Kyosho USA-1), so I have a Kyosho Inferno 1/8 buggy left.
I also have a 1/8 asphalt-racer that I have "build" myself - on a Kyosho Landmax 2 platform. That car has 2x25 Force engines (those were the first 25 engines that was released), 3-gear tranny. triple vented discs front, dual vented discs rear. All hop-ups needed to rule the track... Cool as hell, but never time left to use it....
All monstertrucks are sold (Traxxas T-Max, Kyosho Madforce, Kyosho USA-1), so I have a Kyosho Inferno 1/8 buggy left.
I also have a 1/8 asphalt-racer that I have "build" myself - on a Kyosho Landmax 2 platform. That car has 2x25 Force engines (those were the first 25 engines that was released), 3-gear tranny. triple vented discs front, dual vented discs rear. All hop-ups needed to rule the track... Cool as hell, but never time left to use it....
- Attachments
-
- Marder_Race_5.jpg (110.91 KiB) Viewed 5720 times
Selling your Ti9 mids? PM me, please..
I also need a DD10...
I also need a DD10...
I started off with a traxxas ...then bought an airplane...then thought ....
its easy to make a heli fly like a plane ...
but a bitch to make a plane fly like a heli
so I started to buy heli's
ATM I have 8 in all
6 flying
2 in building
4 are nitro 4 electric
Also have 4 planes
Helps to know the owner of a kick ass hobby shop also....
its easy to make a heli fly like a plane ...
but a bitch to make a plane fly like a heli
so I started to buy heli's
ATM I have 8 in all
6 flying
2 in building
4 are nitro 4 electric
Also have 4 planes
Helps to know the owner of a kick ass hobby shop also....
I have the following R/C stuff...
Team Losi LXT stadium truck
Xray M18 on road car
Tamiya Bullhead monster truck
Graupner Systems Cat (boat)
Proboat Blackjack 26 SS (boat)
And a halfway built JAE12g nitro outrigger (boat)
My problem is I only have one set of radio gear, so I can only install it on one thing at a time. Consequently I use pretty much none of my R/C stuff ever.
I just ordered a 2.4Ghz system which can link to 7 or so models, and that will hopefully solve my problem. I just need to order a bunch of receivers at $60 a pop, so that will take some time to save up.
Team Losi LXT stadium truck
Xray M18 on road car
Tamiya Bullhead monster truck
Graupner Systems Cat (boat)
Proboat Blackjack 26 SS (boat)
And a halfway built JAE12g nitro outrigger (boat)
My problem is I only have one set of radio gear, so I can only install it on one thing at a time. Consequently I use pretty much none of my R/C stuff ever.
I just ordered a 2.4Ghz system which can link to 7 or so models, and that will hopefully solve my problem. I just need to order a bunch of receivers at $60 a pop, so that will take some time to save up.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
Wow, that raider takes me back. Forget that one even existed.
My first car was a Kyosho Ultima II. What Kyosho of similar vintage was off road and front wheel drive?
My first car was a Kyosho Ultima II. What Kyosho of similar vintage was off road and front wheel drive?
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...