Memorial Day Weekend Build Ti 2500.1 pushing 8 R210D

Post by **ttocs** » Tue Jun 29, 2010 6:29 pm

I have no idea as there are too many variables to consider, that is why we have been asking for how long now?

bigsak · Post by **bigsak** » Wed Jun 30, 2010 4:24 am

Ok guys I'm sorry for the delay on posting any numbers. But the fact is the Term Lab software is owned by AAMP and not me and unfortunately this day job gets in the way sometimes. Hopefully I will be able to take the software home this weekend to do some testing. Also even though I have not seen numbers yet I have been thinking about a different box design that is ported. All of the testing we have been doing on site with these woofers suggest that even though they sound great sealed they absolutely slam in ported applications. Basically my thinking is if the enclosure is going to take up my entire cargo area i mine as well squeeze as much SPL out as possible. Let me know what you guys think. Also if I am able to take the mic home where do you guys want to see the mic at. On the windshield, kickpanel, inside the slot or all of the above?

whitenoise · Post by **whitenoise** » Wed Jun 30, 2010 5:27 am

The mic should go on the drivers side window. Pm me and I'll test with you if you want.[/quote]

yeddy · Post by **yeddy** » Sat Jul 03, 2010 6:58 am

All the DB drags I've been to place the mic on the passanger side windshield about 3" from the dash 6" from the pillar, if you put it on the driver side with you sitting in the car, you will effect the numbers...

whitenoise · Post by **whitenoise** » Sat Jul 03, 2010 10:52 am

yes your right but it wouldn't change it that much. No one should be in there when db racing. Put it on the floor for higher numbers

bigsak · Post by **bigsak** » Mon Jul 19, 2010 8:17 am

Ok guys I know its been a while since I posted on here but never the less I did some testing this weekend. With the term lab mic placed on the winshield I hit 146.4. Not bad considering 1 amp to the subs and the same amp on 2 13w7's only hit 141 on the windshield. I do wish I would have built a ported box design just for SPL purposes. I cant say im dissapointed with this enclosure design because it is very clean and deep for 10's. Im not sure what my next move is but I'm am more of a SQ guy by nature so I will probably down scale somewhat so I can have my hearing in my 40's

. But never the less it has been fun and Im very impressed with our products so far. Also for those of you that will be attending the Phoenix meeting in orlando I plan on bringing the truck down there, and from what I here ZAK has something pretty cool planned for you guys.

whitenoise · Post by **whitenoise** » Mon Jul 19, 2010 8:41 am

Nice 146db is great that's what I expected good job