Since i cleared out a little bit i raised enough funds and the fact that one of the six MS2250´s i sold is coming back home i decided to start something new. As most of you know i bought another MS1000TA from a great member in here and sold the boards. That left me with another nice sink at Matt´s which i first wanted to get franked. After some thinking i thought i already have a franked MS1000 and a nickel MS1000 so why not just go with something in white. It´s easier to get some endplates for it too. Matt is working on my sink and the clamp bars this moment. Here are the first pictures of my next project.
And no, it won´t be the BOFAS
MS1000 in white-done-
MS1000 in white-done-
- Attachments
-
- IMG_5790.jpg (152.92 KiB) Viewed 9209 times
-
- IMG_5785.jpg (167.73 KiB) Viewed 9209 times
-
- IMAGE_083.jpg (28.36 KiB) Viewed 9209 times
-
- IMAGE_082.jpg (27.25 KiB) Viewed 9209 times
-
- img_2857_758.jpg (125.12 KiB) Viewed 9209 times
-
- img_2854_140.jpg (98.17 KiB) Viewed 9210 times
Last edited by joerg on Mon Oct 25, 2010 9:47 am, edited 3 times in total.
Music is silver, PHOENIX is GOLD
-
12voltjunky
- Posts: 565
- Joined: Tue Dec 15, 2009 5:10 pm
- Location: Atlanta, GA
Loads of progress on my end today 
Got the sink from Matt and the first board is inside already Now i´m waiting for the second board to arrive and a few caps.
Got the sink from Matt and the first board is inside already Now i´m waiting for the second board to arrive and a few caps.- Attachments
-
- DSC03058.JPG (77.53 KiB) Viewed 9075 times
-
- DSC03063.JPG (117.36 KiB) Viewed 9076 times
-
- DSC03059.JPG (84.74 KiB) Viewed 9076 times
Music is silver, PHOENIX is GOLD
-
mhyde71
- Dr. Jekyll
- Posts: 6231
- Joined: Sun Jan 20, 2008 8:34 pm
- Location: PG FanBoy in Green Mtn Vermont
- Contact:
well i had to mask the device landing areas... and simply didnt want to use up all my tape in masking the entire surface area, so i only masked the device area, and consequently [due to the electrostatics] the powder got/gets everywhere that wasnt/isnt masked.
There are parts/areas on the underside that need to get coated, had to coat those, had to mask some, rest got coated that wasnt masked
iow
just the way turned out / the way i did it- i figured it wouldnt matter once the boards get in there.
the little corners that are there at the ends are me being extra retentive and making sure the threads for end-plate screws would be screwed in easily and not have coating on the threads.
see pic "image_083" up top... you can see the masking process/look.
There are parts/areas on the underside that need to get coated, had to coat those, had to mask some, rest got coated that wasnt masked
iow
just the way turned out / the way i did it- i figured it wouldnt matter once the boards get in there.
the little corners that are there at the ends are me being extra retentive and making sure the threads for end-plate screws would be screwed in easily and not have coating on the threads.
see pic "image_083" up top... you can see the masking process/look.
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
https://www.facebook.com/KhameleonKoatings/photos_albums
-
oldschoolfan
- Posts: 897
- Joined: Wed Nov 25, 2009 11:08 am
- Location: Burb of Detroit
Today i replaced the caps on MS2250 #603 Here are a few pic´s why it is really necessary to also do it on high serial numbered MS amps that have been brought to good use before.
- Attachments
-
- DSC03176.JPG (132.03 KiB) Viewed 8965 times
-
- DSC03175.JPG (102.51 KiB) Viewed 8965 times
Music is silver, PHOENIX is GOLD
-
lowblueranger
- Posts: 123
- Joined: Fri Apr 09, 2010 3:29 am
- Location: Iowa
