jl audio 13w6v2
jl audio 13w6v2
any input about a pair of these in a sealed box in a s-10 ext cab?
Phoenix Gold,Don't Leave Home Without It !!!
-
mhyde71
- Dr. Jekyll
- Posts: 6231
- Joined: Sun Jan 20, 2008 8:34 pm
- Location: PG FanBoy in Green Mtn Vermont
- Contact:
i would say go for it...
i have two 12w6'sv2's and love them to death... mike tried pulling them from my mits a couple times throughout the last couple few years and nothing doing!
sealed with the w6's i found to [me] to be the best sound...
s-10 cab, perhaps a little tight, but if they can go i would do it...
i have two 12w6'sv2's and love them to death... mike tried pulling them from my mits a couple times throughout the last couple few years and nothing doing!
sealed with the w6's i found to [me] to be the best sound...
s-10 cab, perhaps a little tight, but if they can go i would do it...
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
https://www.facebook.com/KhameleonKoatings/photos_albums
-
12voltjunky
- Posts: 565
- Joined: Tue Dec 15, 2009 5:10 pm
- Location: Atlanta, GA
i can vouch for my single 12w6v2!!!
i have three boxesd for it. 1) sealed 2) ported 3) spl (3.5 cu ft net port =30sq in by ~6" deep. over 3.8 cu ft total
boxes 1 and 2 are awesome. i prefer number 2. the spl box sounds like donky shit but will rattle the wipers quite well in a ford expedition
and go deeper than ron jeremy doing so!
i have three boxesd for it. 1) sealed 2) ported 3) spl (3.5 cu ft net port =30sq in by ~6" deep. over 3.8 cu ft total
boxes 1 and 2 are awesome. i prefer number 2. the spl box sounds like donky shit but will rattle the wipers quite well in a ford expedition
and go deeper than ron jeremy doing so!1- Zx 400 Ti
1- Ti 600.2
1- Ti 500.4 (resurrected by valeks1)
2- Ti 500.4
2- Ti 1000.2
2-Ti RMD, Lpl, PG 1/0 Ga
Ti 6.5 comps, Ti 5x7 coaxials
1- Ti 600.2
1- Ti 500.4 (resurrected by valeks1)
2- Ti 500.4
2- Ti 1000.2
2-Ti RMD, Lpl, PG 1/0 Ga
Ti 6.5 comps, Ti 5x7 coaxials