MS 2250?

RayBuck · Post by **RayBuck** » Tue May 10, 2011 12:41 pm

Hello I just signed up to the forum today and need info,help with both of my MS 2250s.I can see that the caps are leaking.I have not hooked them up since my freind that I sold them to in 1995 GAVE both of them back to me

anyhow I would like to use both of them in a instal.Does anyone know someone who fix them or should I send them to Phoenix Gold? Thanks

todd217 · Post by **todd217** » Tue May 10, 2011 2:04 pm

this guy used to work for PG he charges a flat fee and does good work. http://www.altser.com/

RayBuck · Post by **RayBuck** » Tue May 10, 2011 3:05 pm

todd217 wrote:this guy used to work for PG he charges a flat fee and does good work. http://www.altser.com/

Thank You I just got off the phone with him.I will be sending some pics to him.He seemed amazed that I still have my fan shrouds.One more ? should I put serial numbers in the registry?Now that I found this phorum I really wish I had all 4 of my MS 2250s

and my mq 430s my ms275s mps2240,ms 250 mps2500

Pillow · Post by **Pillow** » Wed May 11, 2011 4:50 pm

Thanks for joining us! I think pictures are needed on these beauties

Post by **joerg** » Wed May 11, 2011 10:35 pm

Welcome to the forum! Please post the serials in the limited registry so i can add your amps!

RayBuck · Post by **RayBuck** » Thu May 12, 2011 7:02 am

Pillow wrote:Thanks for joining us! I think pictures are needed on these beauties

Thanks I will post pics soon.I am a computer TARD as for beauties they are not in the shape they were years ago

The shrouds need to be recoated but at least I have them I found them in the top of my old ass barn about 6 years ago right before I tore the barn down with a lull and then lit it on fire.I do not think they would have looked so good after that.

Post by **ttocs** » Thu May 12, 2011 8:20 am

burning those would have made you an even bigger tard for sure

RayBuck · Post by **RayBuck** » Sat May 21, 2011 8:46 am

Pillow wrote:Thanks for joining us! I think pictures are needed on these beauties

Here U Go..Pics..

Post by **joerg** » Sat May 21, 2011 8:57 am

Nice examples in need of minor touch up! I really like the last picture!!!

RayBuck · Post by **RayBuck** » Sat May 21, 2011 9:23 am

Thanks they do need work I can't wait to hook them back up one day.I am trying to get my hands on 2 2125s that a friend of mine has before he hooks them up.My other friend that had my 2250s has 2 of my 275s I am going to try to get those also.Wish me luck.

Stryker · Post by **Stryker** » Sat May 21, 2011 7:16 pm

those are so cool looking. I've always loved the green torroids. after the needed tune-ups they we last a long time I'm sure.

Lance_S · Post by **Lance_S** » Sun May 22, 2011 8:55 pm

if your handy you can swap out the caps yourself. Not tough to do, I just did mine. Great tutorial in the how-to section. Nice amps btw.

RayBuck · Post by **RayBuck** » Tue May 24, 2011 7:06 am

Lance_S wrote:if your handy you can swap out the caps yourself. Not tough to do, I just did mine. Great tutorial in the how-to section. Nice amps btw.

I am a little handy but not really that great at soldering.I am unsure if I should try on my 2250s maybe I will wait until I get my hands on a 2125 that I might get today.I should go ahead and learn because paying someone to repair 2- 2250s 2- 2125 2-275s is going to be alot of money

1 of the 2250s needs a resistor replaced also if you can see that in my pics not sure about fixing that myself.

RayBuck · Post by **RayBuck** » Fri Feb 03, 2012 7:50 am

Post by **kg1961** » Fri Feb 03, 2012 7:53 am

very nice little tlc and you will have another 15-20 years out of them

RayBuck · Post by **RayBuck** » Fri Feb 03, 2012 8:03 am

Thanks

valeks1 · Post by **valeks1** » Fri Feb 03, 2012 8:51 am

What resistor you need to replace on MS2250?

RayBuck · Post by **RayBuck** » Fri Feb 03, 2012 9:31 am

valeks1 wrote:What resistor you need to replace on MS2250?

I am not sure...but I will check I am pulling all my amps out to take pics for another thread.

RayBuck · Post by **RayBuck** » Fri Feb 03, 2012 10:29 am

valeks1 wrote:What resistor you need to replace on MS2250?

R 332.I don't know what caused that could have happend when my buddy had them or from me.I had 4 of them pushing 8 15's 2ohm mono..I had to send at least one of my amps to Phoenix Gold every month back in 1993 1994 you probably worked on them.

crosleykings · Post by **crosleykings** » Fri Feb 03, 2012 12:06 pm

RayBuck wrote:I am trying to get my hands on 2 2125s that a friend of mine has before he hooks them up.My other friend that had my 2250s has 2 of my 275s I am going to try to get those also.

You must have some cool friends! Most of my friends have never even heard of Phoenix Gold. lol

RayBuck · Post by **RayBuck** » Fri Feb 03, 2012 12:17 pm

crosleykings wrote:
RayBuck wrote:I am trying to get my hands on 2 2125s that a friend of mine has before he hooks them up.My other friend that had my 2250s has 2 of my 275s I am going to try to get those also.
You must have some cool friends! Most of my friends have never even heard of Phoenix Gold. lol

Yea there pretty cool.I use to compete "SPL" in highschool so just about everyone who had any kind of system knew about PHOENIX GOLD because that is what I ran in my truck my freind that had the 2125 never ran PHOENIX GOLD he ran ORION amps but knew the 2125 was worth something.I wish he had two of them.

Post by **ttocs** » Fri Feb 03, 2012 3:44 pm

most of my friends know what it is but their wifes will not let them play with any of it....

RayBuck · Post by **RayBuck** » Sat Feb 04, 2012 7:59 am

ttocs wrote:most of my friends know what it is but their wifes will not let them play with any of it....

HAHA sounds like my girl "What are you going to do with those things?"me"I am going to put them in my car.."her"THAT POS!?"

Stryker · Post by **Stryker** » Sat Feb 04, 2012 4:40 pm

holy dead thread revival..... and derailment.

MS 2250?

MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?

Re: MS 2250?