Elite.65cs
Elite.65cs
Hello all, well since I have some Elite amps coming to me I was thinking about using the .65cs speakers as well...
Just curious what your thoughts are in the set if you've personally heard or used them.
Thanks so much !
Just curious what your thoughts are in the set if you've personally heard or used them.
Thanks so much !
System in progress...
Re: Elite.65cs
The Elite line is so new that not many people have them yet. I'm personally looking forward to getting the Elite sub as soon as I have the coin for one. You may be the first to get and review on here.
Elite.65cs
I know they are pretty new, just hoping someone would be able to provide some input...
I have a set of Dynaudio currently slated to install.
I have a set of Dynaudio currently slated to install.
System in progress...
Re: Elite.65cs
Ive heard them in a car, and they have some serious midbass, and im in the middle of saving some to swap out my ti speakers
Jvc KD-A95BT headunit
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Re: Elite.65cs
They where freakin awsome, i compare these to the high end hertz milli. However these guys sound better in a car door than a soundboard
Jvc KD-A95BT headunit
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Re: Elite.65cs
Yeah i first heard them on a sound board, thats why i decided to getthe ti instead, well i have changed my mind since i heard them in two different vehicals, at the shop i work for pt, and have decided to get the elites, instead of doing custom door panels for two sets of ti's...now its just the matter of where im gonna get the elite money...lol
Both application where running off a cd player, not an amp, but i imagine they will sound twice as good on an amp. My exile 600.4 just took a crap on me, and i can tell the difference in sq from the amp to just the hu, on the ti's, and yeah im saving for an elite4 amp as well.
And fyi the elite 12 freaking pounded on the track woofer cooker, and im still not done playing with it to offer my full opinion on it. I think i need to build a ported spl box
Both application where running off a cd player, not an amp, but i imagine they will sound twice as good on an amp. My exile 600.4 just took a crap on me, and i can tell the difference in sq from the amp to just the hu, on the ti's, and yeah im saving for an elite4 amp as well.
And fyi the elite 12 freaking pounded on the track woofer cooker, and im still not done playing with it to offer my full opinion on it. I think i need to build a ported spl box
Jvc KD-A95BT headunit
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Audison bit1
PG Elite65cs in the front doors
PG ti6cs in rear doors
pair of PG ti10d2 for midbass
Elite12d4 for sub
PG basscube with remote
Ti800.4 X2
Ti2500.1
high end Stinger power/ground, speaker wire
and a few other goodies from PAC and Stinger
Elite.65cs
Well I'm going to try them out... I just ordered a set... I plan to run the. Off the front channels of an Elite.4....
I'll provide a review and feedback once they are in....
I'll provide a review and feedback once they are in....
System in progress...
Elite.65cs
Did you get your elites yet? How do they sound?
Last edited by Drock on Wed Jan 09, 2013 8:36 am, edited 1 time in total.
Elite.65cs
I tried out the new elite tweets. And they are in my opinion better sounding than the old ti elite tweeters.
Re: Elite.65cs
It looks like I am going to be getting two sets for my install, but that looks to be a month or two out from now. They'll be running off of an Elite.5 amp, so I figure they'll absolutely scream.
Being loud without good sound quality is pointless, but having good sound quality without being loud is also pointless.
Re: Elite.65cs
There's a review of them in the PA&S this month. It's posted on their sure too.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
- PhuckinGood
- Posts: 245
- Joined: Tue May 24, 2011 1:00 pm
- Location: Bournemouth, England
Re: Elite.65cs
Have you got a link to this review please, I am poised to order a set these too.smgreen20 wrote:There's a review of them in the PA&S this month. It's posted on their sure too.
Alpine CDA-9886R
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
Re: Elite.65cs
http://www.pasmag.com/car-audio/reports ... t-speakersPhuckinGood wrote:Have you got a link to this review please, I am poised to order a set these too.smgreen20 wrote:There's a review of them in the PA&S this month. It's posted on their sure too.
Being loud without good sound quality is pointless, but having good sound quality without being loud is also pointless.
- PhuckinGood
- Posts: 245
- Joined: Tue May 24, 2011 1:00 pm
- Location: Bournemouth, England
Re: Elite.65cs
Thank you, think I will get my order in, hoping PG would bring out a high end three way system .... maybe in the future.Kirghiz wrote:http://www.pasmag.com/car-audio/reports ... t-speakersPhuckinGood wrote:Have you got a link to this review please, I am poised to order a set these too.smgreen20 wrote:There's a review of them in the PA&S this month. It's posted on their sure too.
Alpine CDA-9886R
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
- PhuckinGood
- Posts: 245
- Joined: Tue May 24, 2011 1:00 pm
- Location: Bournemouth, England
Re: Elite.65cs
Ordered a set today 

Alpine CDA-9886R
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
Re: Elite.65cs
My Elite.65cs set arrived today... along with the Elite.5...
Fun days ahead...
Fun days ahead...

System in progress...