2 cyclones in a honda civic hatch in the uk

[ttocs]

most people will take them apart to inspect/clean the motor assembly as they tend to develop some noise after prolonged use. I was only lucky enough to build a box for and install one in a customers car and I still remember being impressed with the output. We had to match it up with a 10" to cover bass above 50 hz but with a small amp on the clone and the 10" it pounded like all hell. The 4 cuft box between the two took up most of the trunk but watching my drill get launched off of the rear package tray when we first cranked it up is a memory I will never forget.

[mtnman423]

was the install with both in the same 4 feet space or did they have their own 2 foot chamber? Also was the cyclone motor in o out of the 4 foot box?

[mtnman423]

I came across a box that is built for 15's that 2.3 feet per chamber. All I have to do is change out the front panel in ordr to adapt the box for the cyclones. If the 4 feet is needed, I can cut out the partition between the chambers.

[mtnman423]

I have tried about everything in getting my cyclone unstuck. Does anyone that has cleaned one have any suggestions? I don't have a vice to use as suggested.

[ttocs]

tried penetrating oil or freeze off?

[mtnman423]

Yes, I used WD-40 and let it sit overnight. I could try adding more. I didn't want to use too much and ruin anything.

[mtnman423]

So I got the cyclone apart finally. The magnet is broken off in one spot. Does anyone know how much of the magnet can be missing and the sun still work.

[ttocs]

not sure I know anyone that has ever ran one partially together and its not something I would recommend. Sorry man that sucks...

[mtnman423]

I got both my cyclones apart and I'm afraid I'm gonna have to have one for parts and one that works. With my first one it has a chunk of the magnet broken off and on the second the "hot" wire is burned. Since one is probably gonna be junk anyway I may try to get it working and hope for the best. I can put the broken magnet back together and seal it so that it won't move or shake around and the burnt wire can be replaced. What's everyone's thoughts. I was really wanting to hear and feel both of these working.

[ttocs]

welcome to the phorum. feel free to start your own post about this if you want rather then the 3 its currently in. IT will be easier to follow and you would get better responces.

[mtnman423]

Instead of using three different forum topics, I will start a new on about my journey servicing my cyclones. Please feel free to follow me on my journey making my clones come alive. I look forward to everyone's comments.

[mtnman423]

Be sure to keep up with my Cyclone journey in the forum. here is he link http://www.phoenixphorum.com/viewtopic. ... 80#p251980

[mtnman423]

So I now have this new obsession of fixing the PG Cyclones. If there is anyone out there wanting to sell one message me. mtnman423@yahoo.com

[mtnman423]

Here is a copy of an email that I just got from the new owner of PG. hope it helps out.

[gratest1]

Hello all, car still going strong, cyclones still playing away. Just thought id check in.