I'm a little torn ... I'm looking for real world experience . I'm putting a set of focal 165 krx 3's in my car and can't decide what to do with the mid bass drivers . I'm putting the mid's and tweeters up on the a pillar way out on the dash . should I ...?
A. kickpanel mount
B. door mount with sealed enclosure
C. door mount with infinate baffle
Right now I will be running them off of my zx950 until my M's are fixed up . I'm using an ms-8 for processing
design conflict ?
-
ludeboost98
- Posts: 117
- Joined: Tue Feb 15, 2011 12:53 pm
- Location: Baltimore , MD
design conflict ?
1x MS1000TA
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
Re: design conflict ?
kickpanel- *IF* you can vent them properly in to the sills, 2nd choice and the choice that makes the most sense would be infinate baffle in doors on extremely stiff/solid baffles and plenty of deadening/treatment to both inside and outside door skins.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!