Elite mid blown already? 6"

Post by **smgreen20** » Mon Sep 24, 2007 1:51 pm

Well.......
I think it's blown. I set the gains on the ZPA0.3 to 200wrms per side and the drivers side mid sounds shot. I don't go past 56 out of 62 on the Pioneer HU P980BT.

I'm thinking about putting the RSD 6 mid in its place on both sides. Wondering about the side effects that that would have on the Elite XO and tweet?

I'm going to look into warranty from woofersetc where I got them.

Post by **Bfowler** » Mon Sep 24, 2007 1:54 pm

something i noticed that seems to happen on them is the surround becomes unglued. check that first

Post by **bdubs767** » Mon Sep 24, 2007 2:01 pm

Someone may be willing to sell one spare mid....maybe

Post by **Wakeup** » Mon Sep 24, 2007 4:41 pm

Bfowler wrote:something i noticed that seems to happen on them is the surround becomes unglued. check that first

So does regluing them fix that?

Post by **Bfowler** » Mon Sep 24, 2007 4:55 pm

yessir

Post by **Wakeup** » Mon Sep 24, 2007 5:34 pm

ooh...goodie...! I have one bad one, and one that the glue seemed to come undone. What kind of glue would you use?

And picked up a spare 5" from a local. See my post in the auctions section. About the 3x ms1000's

Post by **Bfowler** » Mon Sep 24, 2007 5:51 pm

i used a 2 part epoxy on mine, applied with a q-tip with the cotton part torn off (so just the stick part)

Post by **Wakeup** » Mon Sep 24, 2007 7:51 pm

got any spare 2 part epoxy?! hehe

Post by **smgreen20** » Thu Sep 27, 2007 12:44 pm

The surround is a ok.

HoseHead · Post by **HoseHead** » Thu Sep 27, 2007 1:44 pm

Automotive Goop.

It stays fexible after drying and holds anything to anything.

Eclectic Products Inc.
Pineville LA 71361
1-800-767-4667

gixerboy · Post by **gixerboy** » Fri Sep 28, 2007 5:47 am

check the tinsel on the back of the cone,sometimes it slaps off the cone as it moves and makes a crap noise

Post by **Bfowler** » Fri Sep 28, 2007 7:51 am

HoseHead wrote:Automotive Goop.

It stays fexible after drying and holds anything to anything.

Eclectic Products Inc.
Pineville LA 71361
1-800-767-4667

sounds like lots of fun to use on things other then speakers!