phoenix gold ti10d sub enclosure

Jeroen · Post by **Jeroen** » Sun Dec 30, 2012 5:16 am

Hi there,

I want to build a new box for my ti10s. I am running them each of a zpa0.3 ... if maybe anyone can tell me what is the best volume sealed and ported and if ported what is the best volume of the port?

thanks in advance...

greets from Holland

Jeroen

todd217 · Post by **todd217** » Sun Dec 30, 2012 5:25 am

are you talking about the old or new titanium 10s

Jeroen · Post by **Jeroen** » Sun Dec 30, 2012 5:27 am

the old ones without the leds

dvnt88 · Post by **dvnt88** » Sun Dec 30, 2012 6:23 am

Jeroen wrote:the old ones without the leds

Here's the manual from the site and should help. I ran 2 TI10's at .55cuft^3 per side (sealed) and they sounded phenominal ...loud, tight and accurate off a JL 500/1v2.

Drock · Post by **Drock** » Sun Dec 30, 2012 7:13 am

I am using four of them at 1.2 cu.ft ea, with a a divider in the middle making two chambers. So two subs per chamber. Each ha her is ported 3" x 12-3/4 long. I have no idea of the tuning it's at. It is very loud and very solid sounding. They are powered with two ti 800.1's at the moment.

Jeroen · Post by **Jeroen** » Mon Dec 31, 2012 8:29 am

First i had 2 xmax 12" woofers on 1 zpa 0.3. They broke down after 15 years. So i bought these ti's. Bought a second zpa 0.3.
I have build them in the box i had for de xmax''s... sounds great and loud as you guys mentionend, but i think it can be much better if i build the right box for them.

I love Phoenix Gold. Great stuff... but very very expensive in my country and hard to come by.

Thanks for the quick replies...

greets from Holland

Jeroen

Jeroen · Post by **Jeroen** » Mon Dec 31, 2012 8:36 am

@dvnt88 the manual you gave is not them. The ones i have are the same as the ti2's but without the leds.

dvnt88 · Post by **dvnt88** » Mon Dec 31, 2012 2:21 pm

Jeroen wrote:@dvnt88 the manual you gave is not them. The ones i have are the same as the ti2's but without the leds.

Hey bud ...these are the old-skool TI10's and the maual provided for them is correct. Sounds like you have the newest version of the TI's.

Post by **AVICJR** » Mon Dec 31, 2012 2:57 pm

He has the newer TI10's, the ones that were replaced by the current model- TI2 10's. I know, I know it is confusing.

EDIT: The one's before these-

http://www.phoenixgold.com/products/subwoofers/Ti2/

Jeroen · Post by **Jeroen** » Tue Jan 01, 2013 1:35 am

Yes thats right...

these are the ones http://www.youtube.com/watch?v=boLSjocxOn8