Logo Silk screening

foosman · Post by **foosman** » Fri Apr 24, 2009 5:44 pm

Does anyone have the logos on silkscreen or another form that can be downloaded and reapplied after refinishing the surface of the amps?? My Ti's have a little rust in places and need to be redone.

Post by **AVICJR** » Sat Apr 25, 2009 7:21 am

I believe you're in TX, correct?? If so, I have a Ti1200.1 that I may have redone as well if you can find something. Maybe with another amp we can lower the cost for each other.

GX3 · Post by **GX3** » Sat Apr 25, 2009 7:36 am

i priced this out at a local shop. The min was 150 for the set up for one screen so. I dont know if that is high or not. Mhyde71 should know he has been setting up and doing some SS on plexi for some time now

Post by **Jacampb2** » Sat Apr 25, 2009 7:38 am

I have a lot of the Zx600Ti cover art vectorized, but I never got around to the front panel yet. You will actually need to take the vector art work to a vinyl cutter to get decals made, or to a screen printer to have the cases re-screened. It will be hit or miss finding a screener that can do a metal case, most of them are geared up for cloth and ceramics and such.

What Ti's do you need art for?

Later,
Jason

dBincognito · Post by **dBincognito** » Sat Apr 25, 2009 7:55 am

I still think they are stickers on the Ti amps......you can peel them off

Post by **stipud** » Sat Apr 25, 2009 8:26 am

dBincognito wrote:I still think they are stickers on the Ti amps......you can peel them off

Not a chance. Definitely silk screened, like every other PG amp.

dBincognito · Post by **dBincognito** » Sat Apr 25, 2009 8:27 am

stipud wrote:
dBincognito wrote:I still think they are stickers on the Ti amps......you can peel them off
Not a chance. Definitely silk screened, like every other PG amp.

It does seem like it may have been a different process for putting it on those cases ?

You can really feel those logos on the Ti amps vs. the other amps

Post by **mhyde71** » Sun Apr 26, 2009 4:31 am

nah, defo silk screen...

I am working on getting artwork vectorized and stuff, I am trying to have a number of different amps pass thru here so when/as they do I am scanning them and such.

If you have stuff that you are able to simply scan, shoot it to me or jason, and either one of us might could get it vectorized and then I can come up with screens and such... but warn you this is not a speedy process as I dont do it for a living, just a hobby, and it does take a lot of work... But i am getting set up to run plexi's here pretty soon.

foosman · Post by **foosman** » Sat Jul 04, 2009 3:02 pm

Ok I'm finally ready to proceed with this. The amps I will need the silk screen for are:

Ti 400.2
Ti 600.2
Ti 800.1