MY M44 PROJECT

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
User avatar
Marcotah
Posts: 227
Joined: Tue Jun 19, 2007 3:13 pm
Location: Petropolis- RJ

Post by Marcotah »

mhyde71 wrote:SO you want a black and pink combination amp color(s)???
Yes bro, I think it would be nice matching...just like the "Frankampin' Stein" I think...
mhyde71 wrote:I have a semi gloss black powder coat I could do and a top clear coat with pink metal flake if you would like.. simliar to the way my M44 looks up above, but with just the pink flake... then the sink could get powder coated pink... and the TEAM GOLD LOGO could be silkscreened on to it.
Yeah, I got what I meant...just like this...but as I said, I don't know about computer programs, so I don't know how to "edit" the image that "spirit" gave us...Do you understand what I mean? Or it's not possible/ necessary to make the modification?
mhyde71 wrote:LMK, i can help with all of that if you would like.. just need the base, cover, and heat sink sent to me... or I could help you do it yourself if you would like... lmk
I guess It would be the better way, BUT...I would be expensive enought to make me cry...I actually live in Brazil...so I guess would be around 80 Dollars or so just on shipping rates...
I thing would be cheaper and better if you can just tell what and how to do...
The basics paint i have an idea, but the silkscreening...I was wondering what about plotter it and than, after painted, put it on the cover, and the come with a glaze over all that...just like the bikes fuel tanks.
Thanks man!
Top
Pedi
Flærdy flærdy børk børk
Posts: 2384
Joined: Sun Jul 01, 2007 9:58 am

Post by Pedi »

@Spirit:

Wow, That M100 turned out nice!

How did you do with the silk-screening? Any company local to you that did the job?
Selling your Ti9 mids? PM me, please..

I also need a DD10...
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

HOWS THIS LOOK GUYS....?!?!?!?

What'cha Think?? Or Shoot for more of the OEM font, Which I Have.. but kinda like this here...:

SHADOW OR NO SHADOW???
Now remember this is going on a black background, howvere does have gold and other color glitter flakes... what say you guys!?!?

(Edit) The more i think about it, the more i thnk that i wouldnt be able to make such a good looking drop shadow (sample 1) with silkscreening.. I bet that is difficult or takes some talant/ know-how... that i dont have as of yet...

OR JUST TELL ME I HAVE PUSHED THE ENVELOPE TOO FAR AND SHOULD JUST KEEP IT OEM LOOKING?? I KINDA LIKE IT, THE NEW STYLE :wink:
Attachments
FINAL-w.-RCA-&-GOLD-PG.jpg
FINAL-w.-RCA-&-GOLD-PG.jpg (144.21 KiB) Viewed 6017 times
FINAL-w.-DROP-SHADOW.jpg
FINAL-w.-DROP-SHADOW.jpg (153.74 KiB) Viewed 6017 times
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:
Contact stipud

Post by stipud »

The aliasing on a blurred drop shadow like that will be very difficult to print.

I recommend you do a non-blurred drop shadow if any at all.... like behind the Phoenix Gold lettering.

Also, having two opposing drop shadows does look a bit silly. If you do it, remove it from around the Phoenix Gold text first.
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

yeah i dont think imma gonna do the back drop shadow... it's going on black paint and wont show all that all i bet anyways and makes it a little confusing...
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

OKAY... and in full discloser the reason i am pressed about getting the Mseries stuff completed and ready for printing is becasue I also have an outlaw I am working on and that will be undergoing some resoration... for another meber on here of which we have discussed starting a thread... but here is a pdf download of the outlaw font sample i just shot at him, and wanted to hear what say you guys...
Attachments
OUTLAW FONT M100.pdf
(98.87 KiB) Downloaded 317 times
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
scottn29
Posts: 461
Joined: Mon May 04, 2009 4:04 pm

Post by scottn29 »

Are you gonna change the black part of the rcs's on the print?
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

OKAY SO ONE MORE STEP IN RIGHT DIRECTION....

TERMINALS DYED AND INSTALLED... AND ALL NEW SCREWS TOP BOTTOM FRONT AND BACK AND SPEAKERS ALL NEW SHINY GOLD SCREWS!
Attachments
IMG_8873.JPG
IMG_8873.JPG (207.39 KiB) Viewed 5930 times
IMG_8872.JPG
IMG_8872.JPG (194.89 KiB) Viewed 5930 times
IMG_8871.JPG
IMG_8871.JPG (211.4 KiB) Viewed 5930 times
IMG_8870.JPG
IMG_8870.JPG (210.87 KiB) Viewed 5930 times
IMG_8869.JPG
IMG_8869.JPG (179.97 KiB) Viewed 5930 times
IMG_8868.JPG
IMG_8868.JPG (198.16 KiB) Viewed 5930 times
IMG_8867.JPG
IMG_8867.JPG (166.06 KiB) Viewed 5930 times
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
fuzzysnuggleduck
Soy Milquetoast
Posts: 4423
Joined: Wed Dec 06, 2006 1:08 pm
Location: The best place on earth
Contact:
Contact fuzzysnuggleduck

Post by fuzzysnuggleduck »

Good work! Looks much better with the black terminals.
SOLD: '91 PG 4Runner
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

fuzzysnuggleduck wrote:Good work! Looks much better with the black terminals.
\yes yes / thank you fuzzy!

Silkscreening is all that's left, should look great once completed!
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14797
Joined: Fri Dec 19, 2008 9:53 pm

Post by ttocs »

agreed, the black is much better. Lookin good mang!
Top
User avatar
DDD
Posts: 5
Joined: Sun Dec 14, 2008 4:54 am

Post by DDD »

Yeah it looks great mate Gonna be one bad-ass looking M44 when youre done, but FYI youre working on the wrong project :lol:[/i]
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

I was hit with a bucket of shit reality last night... I spent couple hours at the screenprinting shop and all the artwork I have done/made thus far, have or was sent/given by others is not working properly at silkscreeners for/to expose onto film... Which we discussed a bit last night, but basically the art work i have for screening is not going to work. Which I am pissed and awfully disappointed about... BUT it can and will, it's just gonna take some doing and converting/tracing where needed etc.
I just dont get it, even the artwork that jason sent me that he uses for his work(s), is not working... Guy at silkscreening shop says that some of the graphics are bit maps, and there are aligment issues, etc... F^%$

BUT DONT FRET- It'll get done right... The labeling and the "Phoenix Gold" are all okay... what he is having trouble with is the Team Gold Artwork and MADE IN US Hand- they appear to be bit maps in that download provided.

BUT the stuff for the outlaw, which will only be text, is okay (DDD), AND then in that case, i may just leave off the TEAM GOLD AND MADE IN US HAND...
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
fuzzysnuggleduck
Soy Milquetoast
Posts: 4423
Joined: Wed Dec 06, 2006 1:08 pm
Location: The best place on earth
Contact:
Contact fuzzysnuggleduck

Post by fuzzysnuggleduck »

Yeah, you need vector images, not bitmaps.
SOLD: '91 PG 4Runner
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

yeah it's weird, the artwork i did I did it AI CS3, using pen tools and all that stuff, but it's the OEM M100 file that spirit posted/offered (which he was able to get silkscreened) is not vector - so maybe the printer that did his work, has the vector, but then converted it to .pdf to send to him for his review or whatever, and in the process it converts it to bitmap for the pdf viewing... i dunno

BUT the artwork I have created (as seen above) is all vector.. but he went to expose the M100 OEM artwork and says no way- it aint gonna work... so maybe any/all artwork will be made custom from myself or unless someone really has vector artwork they would like to use.

I.e. (and shortly DDD & I will be posting up the thread for his restoring of an outlaw), that artwork is custom w/ a western theme font for the labeling.
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

What the problem is, :oops: now that I remember more clearly now (we had a few last night)

IT IS B/C the ARTWORK IS DONE WITH CMYK, and not PANTONE... ISnt that some BS???!?!?! Can that be, or maybe I need to find "second opinion" and maybe ask/try a different silk-screener for their input.?.
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
fuzzysnuggleduck
Soy Milquetoast
Posts: 4423
Joined: Wed Dec 06, 2006 1:08 pm
Location: The best place on earth
Contact:
Contact fuzzysnuggleduck

Post by fuzzysnuggleduck »

Sounds like the silkscreener has PANTONE-specific printing gear, then.

If you want to convert it...

http://web.forret.com/tools/color.asp
SOLD: '91 PG 4Runner
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

WOW NO WAY! never knew such a thing existed...

I am going through various / pressing files (outlaw, m44, m100, etc...) amd converting everything over now... THIS convertor looks awfully interesting... YES YES THANKS THANX
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:
Contact stipud

Post by stipud »

Lots of software should be able to convert it. I'm shocked the guy doesn't have something himself... Even Photoshop would probably do it.
Top
User avatar
mhyde71
Dr. Jekyll
Posts: 6231
Joined: Sun Jan 20, 2008 8:34 pm
Location: PG FanBoy in Green Mtn Vermont
Contact:
Contact mhyde71

Post by mhyde71 »

yeah, and whats more, maybe to tell me in advance of his limitations/requirements before working it all up and then finding out.

BUT I got a lot of work done last night... just about re-did all that needs to get re-done... Some end plates, artwork for outlaw, m100, and some run-of-the-mill logo's (rca logo, PG, Broken Line PG, etc...) got a lot of stuff done (went to bed 430am and I am F%$#@(D today though (payng for that now- sheeet!)_... i'll post up lil later on... just hadnt saved any for web viewing and all in vector format right now.

BUT they look good, simply just changing the pallet from CMYK to PANTONE
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
Top
BIGPGFAN
Posts: 15
Joined: Sat Jun 06, 2009 6:55 pm

Post by BIGPGFAN »

Wow that is one sweet M44 :drool: :bounce:


Have you done any work with the frank looking finish, with silk-sceening ?


Have you silk-sceened anything yet, this is very cool
Top
Post Reply

Return to “Car Audio”